Is it important same type of RAM when u r adding more RAM to the existing RAM?

Question

Suppose if i don't get the same RAM, wht i hve on my system nw, wht i should i do?

Answer 1

go to crucial.com and try to get the same type, size, and latency if possible .. its best to have ram in pairs of matching sticks ... but its possible to run ram of the same type ie: ddr1 rated at different speeds .. the ram will run at the speed of the slowest module tho ..

Answer 2

For best performance all Ram modules should be the same type and speed.

If you don;t get the same ram module the only thing that will most likely happen is that the system will reject the module, in other words the bios will not recognize the added ram. .

Answer 3

Hello Jai,
It depends upon your system. But, no body can tell you exactly whether there would be any problem or not.

I use a Wipro Voyager and had a D-Link Ram and soon I added a local company RAM. During the process of installation I had some problem and called up and Wipro and they asked me to remove the new RAM and told me it might cause "RAM speed Mis-Match problems".

However, I continued using both and it as been 4 years since then but I had not got any problem.

Answer 4

a pair of the faster solutions hit the extreme factors. you're constrained by potential of obtainable slots, and the OS. you have have been given the open slots, so because it incredibly is cool, however the latency distinction will impose the decrease decrease on the two units. i'm no longer specific what over-clocking the RAM facilitates...you may surely get greater overall performance out of the hot RAM on my own [over-clocked] than with the two. abode windows help varies by potential of OS and version [link below]. The web site does not specify requiring 64bit, yet on launch, 64XP professional fairly reported it ought to make the main of greater ram than XP [it fairly is at odds with the MS link which merely says "professional", so i'm uncertain].

Answer 5

Some motherboards support Dual Channel memory so if you have the same pair it will help you in faster transfer of data however if your mother board doesnt support Dual channel memory and you are not interested in this feature then you can purchase different brand of RAM however make sure the new one has the same bus speed as the older one say for eg 533 Mhz.

Answer 6

its very important that u get the ram of the same clock speed and latency. check if u can get a new one from the same manufacturer. in case u can't then swap the old memory modules with a new one. if the new ones aren't compatible with the motherboard, for eg ur motherboard can support only ddr 266/333 modules and u no longer get them u get only ddr400 modules. in that case consider upgrading the bios which solves the problem.

Answer 7

Well, the brand doesn't matter. But if you're using dual channel memory, you have to use memory modules that are of equal size in order to use the virtual "dual memory". you can use asynchronsis memory and have the amount of ram that is installed, such as a 1gig stick and a 512, but it won't have the dual channel memory ability.

Answer 8

If it is SD Ram or DDR ram, then no, you don't have to pair them up necessarily but it MUST be of the same type. For example, if the BUS speed is 333 MhZ then you must add the same, you can't use DDR 333 with DDR 400

Answer 9

Important in order to run at optimum speed, timings and dual channel mode (if board is capable). BUT mixed RAM would still work.

Answer 10

Yes it is necessary to specify the type of RAM when you buy it.