what do i do if my bearings balls fall ?

Question

i have bones swiss and i was cleaning them but the balls fall and i dont know how to assemble it again, plz help!

Answer 1

There should be a plastic or metal retaining cage within the bearings that you can pop the balls into. Check to see if you put the cage in the right way and that the balls are seated within the cage properly. The cage is pretty obvious and looks like a ring with several holes for the balls, so put them in there.

It might take some work, and can get tricky to put the balls back in the retainer cage, but it can be done. Also, you can buy spare balls for the bearing of you lose some.

And if all else fails and you cannot find a place that sells spare balls, you can always buy individual bearings.

In the future, you don't really need to take the balls out of the cage. All you need to do is remove the shield, and blast out any dirt or debris with WD40 or degreaser, dry them, relube them and put the shields back on. Trust me, its easier on your bearings and you won't have to worry about losing the balls or breaking the cage.

Answer 2

I take it you acquire the bike used. the clarification the front wheel hit the fender grew to become into that the hub grew to become into wiped out, the unfastened ball bearing in all likelihood got here from there. Huffy's are low fee because of the fact they are construct fee effectively from the main inexpensive factors achieveable. bypass to a real bike keep no longer a branch keep and purchase a real bike. it's going to incorporate a guarantee, you would be greater suitable off interior the long-term. it's going to fee two times as plenty to restoration the bike than this is nicely worth.

Answer 3

pssshhhh i used to put old bearings togeather trust me its no walk in the park so if u dont know how just buy sum new bearings

Answer 4

i used to make roller bearing you need some type of a press make sure you put grease on them to good luck, maybe a vice grip