2007-08-15 02:43:23 · 10 answers · asked by John B 1 in Cars & Transportation ➔ Maintenance & Repairs
"T" cut and polish....or any rubbing compound...not sure what equivalant product americans use though???
2007-08-15 02:50:52 · answer #1 · answered by djave djarvoo 'djas originel 5 · 0⤊ 0⤋
It is possible, I've seen a few jobs done like that come out pretty good. The biggest problems you'll face is dirt/dust flying in the air and sticking to the paint while it's drying. But if you do go this route, make sure you do sand off the old paint and get a primer coat on there too.
2016-05-18 03:15:14 · answer #2 · answered by ? 3 · 0⤊ 0⤋
Try antisilicon. It's a liquid wich car painters use for cleaning a car before painting. Don't use nitro because it will damadged your paint. And machine polish will do well.
2007-08-15 03:41:05 · answer #3 · answered by gorann123 1 · 0⤊ 0⤋
In the body shop we use lacquer thinner on a paper towel every day.No,it won't do anything to the original paint.
2007-08-15 04:01:54 · answer #4 · answered by wildmanny2 7 · 0⤊ 0⤋
T cut,it is a fine abrasive paste that is used the remove
over blow by the professionals and ordinary people.
2007-08-15 02:56:17 · answer #5 · answered by Anonymous · 0⤊ 0⤋
use a little rubbing compound,if you use thinner you could remove paint from the cars finish and have a cloudy area where you wipe it
2007-08-15 02:50:55 · answer #6 · answered by Anonymous · 0⤊ 1⤋
Try some rubbing alcohol.
2007-08-15 02:55:31 · answer #7 · answered by ? 6 · 0⤊ 0⤋
WRONG TO ALL THE ABOVE ANSWERS.....................
USE CLAY WITH EITHER WATER OR WINDEX.
FAST AND SIMPLE AND IT WORKS GREAT.
MOST AUTO PARTS STORE CARRY IT AND IF NOT JUST VISIT YOUR LOCAL BODY AND PAINT SHOP AND ASK THEM IF YOU CAN BUY SOME.
2007-08-19 01:25:30 · answer #8 · answered by Anonymous · 0⤊ 0⤋
Try a cloth and a thinner or reducer...
Good lack!
2007-08-15 02:48:07 · answer #9 · answered by Mazda man 6 · 0⤊ 0⤋
WD40
2007-08-15 02:50:03 · answer #10 · answered by ed 7 · 0⤊ 2⤋