English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have installed new plugs,3 power packs, trigger and stator

2007-08-12 12:45:17 · 4 answers · asked by Anonymous in Cars & Transportation Boats & Boating

4 answers

I would also replace the fuel filter, oxygen sensor and if it's a 2 stroke make sure your oil mixture is not to oil rich. That may cause rough running problems too. Also check to make sure you have a good ground conection on your battery. Make sure spark plug wires are not resting or chafing on anything metalic.

2007-08-12 13:40:30 · answer #1 · answered by David J 2 · 0 0

Disconnect the kill wire on the engine as it might be shorting out an causing a miss.

2007-08-12 13:31:32 · answer #2 · answered by 45 auto 7 · 0 0

Could be a bad plug wire.

2007-08-15 15:36:26 · answer #3 · answered by Chevy 1 · 0 0

well i guess you have spent plenty of money on that baby, huh? what's the compression? are the carbs. clean and set right? what do the reeds look like?

2007-08-13 02:27:47 · answer #4 · answered by Anonymous · 0 0

fedest.com, questions and answers