I'm using flexible pvc tubing for my pond. The tubing is smooth on the inside and I was told to use a barbed fitting with a hose clamp on the outside. I have 1 1/2 tube and 1 1/2 fitting. But the tubing wont slide on, I've tried as hard as I can to foce it but to with no success.
My question is will PVC Primer soften the tube to the point where it will stretch over the fitting?
2007-08-10 17:14:52 · 2 answers · asked by max_cw 1 in Home & Garden ➔ Garden & Landscape
had the same problem when hooking up my well
use a heat gun or a hair dryer on high to soften the plastic pipe, ran a 100 ft ext cord. or a propane torch [very sparingly] then shove it on the fitting,
primer will soften it tooo much.
2007-08-10 17:32:01 · answer #1 · answered by William B 7 · 0⤊ 0⤋
you should definately use the correct fitting. Go to the home center with a sample to make sure it fits well or go to a plumming supply store, they will be more than happy to help!
2007-08-11 00:33:12 · answer #2 · answered by what the 1 · 0⤊ 0⤋