2007-08-10 15:47:52 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Chevrolet
Auto machine shop.. Look in your phone book for auto machine shop.
Alot of car quest auto parts stores and napa auto parts stores has machine shops in the back.
Most shops will charge $8 to $12 per hole to bore and hone.. The shop I use charges $96 to bore and hone a chevy v-8
Now alot of shops won't bore a dirty engine, so you may have to pay to have it hot tanked 1st.. Which will run between $40-60, but worth every penny.. Comes out looking like new.
Also you may want to have it cecked for cracks before you have it bored..Just to be safe, rather than sorry.
2007-08-10 16:02:50 · answer #1 · answered by chevyraceman_383 7 · 2⤊ 0⤋
You can get them bored at a local automotive machine shop. just look in the yellow pages, or contact a local speed shop and see who they use.
2007-08-10 22:52:00 · answer #2 · answered by Fordman 7 · 0⤊ 0⤋
well if you take out the back seat of the car it goes in you can put as many boar as you want.
if you want to bore it the other answers will be accurate
2007-08-10 23:10:34 · answer #3 · answered by vincenzo445 4 · 0⤊ 1⤋
take it to a good machine shop to have this done right,if someone does it that doesn't know what their doing they can ruin the block ,make sure its someone with experience that does this,good luck on it.
2007-08-11 00:46:20 · answer #4 · answered by dodge man 7 · 1⤊ 0⤋
find a machine shop in your local yellow pages
2007-08-10 22:56:08 · answer #5 · answered by Anonymous · 0⤊ 0⤋
i suggest a machine shop . oh and bring your check book
2007-08-10 22:51:23 · answer #6 · answered by Anonymous · 0⤊ 0⤋