Ok i was tradind suspension on my 92 honda with another 92 honda and the axle popped out of place and we got in back in place but when i go in first it just revs really high as if its in neutral i put the axle back in the tranny..
2007-08-09 14:08:33 · 6 answers · asked by kcrealty2 2 in Cars & Transportation ➔ Maintenance & Repairs
That axle is not engaging the axle gear in the tranny. Pull it out and put it back in. It should go in all the way to the cv joint. If that doesn't work, the axle gear is broken and the tranny will need to be removed and disassembled to replace it.
2007-08-09 14:32:38 · answer #1 · answered by Ron B 6 · 0⤊ 0⤋
the axle clip is off in the differental sounds like. That axle popped out for a reason maybe the splines are not hooking into the transaxle like they should.
2007-08-09 21:16:46 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Compare both axles replacement and original side by side. You may have a limited slip axle and a regular axle.
2007-08-09 21:34:27 · answer #3 · answered by John Paul 7 · 0⤊ 0⤋
Could be the axle is not seated correctly in the transmission...remove it and try putting it in again...
2007-08-09 21:11:52 · answer #4 · answered by Anonymous · 0⤊ 0⤋
it may not have locked in to the splines in the transmission id try doing it again,that's the only option you have on this one,good luck on it.
2007-08-09 21:13:46 · answer #5 · answered by dodge man 7 · 0⤊ 0⤋
make sure the spap ring was on the end axel and if it was make sure it spapped in placed is tranny fluid dripping??
2007-08-09 21:16:09 · answer #6 · answered by jimi c 4 · 0⤊ 0⤋