Get more than one estimate. Of course they are trying to sell you a whole new unit. That's how they make money.
Get another estimate.
2007-08-06 14:08:41
·
answer #1
·
answered by Anonymous
·
1⤊
0⤋
The price is ok.
To replace the original system it would be recommended to get a whole new unit if possible (some installations are just too hard to install after the building has gone up). The most expensive part of any split system is the outdoor section as it houses all the major componentry, the indoor unit is basically a box with a fan and a coil.
Get 3 quotes and choose the one that will deliver the best efficiency and reliability - hang the price - it is much more important to get the efficiency and reliability sorted as it will save you in long run believe me.
As time goes on the efficiency will pay for itself and the reliability will just push you into the green compared to others who choose only on price.
If I was in the market to buy an A/C system now (and I have 23years in this industry) I would choose 1 or 2 manufacturers that I KNOW are good and ignore the rest. if you're interested to know who, you will have to read the info from the site below. (I don't want this posting to get any longer :)
2007-08-06 15:10:19
·
answer #2
·
answered by Kismet 2
·
0⤊
0⤋
you should have replaced it a few years back. 20 years is a really long time. When they get to about 15 years, depending on how hard they are used is the max. When they are upwards to 12-15 years you are better off in the long run just replacing it especially if you live in a warm climate. Now you might have people tell you " ive had mine for 25 years or so and it still works fine" but every unit/situation/set up is different from the next one. There are many factors that come into play. My in laws live in Florida and they had to have their unit replace just after 12 years. Of course in Fla it gets used all the time. But its always a good idea to get at least 3-4 estimates and remember its not always the best idea to go with the cheapest company. Its like the old saying goes sometimes you get what to pay for. anywhoo good luck to you and Fyi 2900 doesnt sound too bad considering that you are looking at efficinent one.
2007-08-06 15:24:13
·
answer #3
·
answered by tony p 1
·
0⤊
0⤋
Don't feel bad, my estimate today went up to 6K for a 21 SEER unit. The house is 2400 sqft. Most of the old units used a freon that was called R22. In 2010 they will discontinue making that freon. The new stuff is R410a. I was told that the guys will have to replace everything including the copper lines from the furnace to the outdoor compressor. There is something about the oil not being compatable with the new freon. This new stuff is supposed to be more environmentally friendly.
I know it sounds like a lot but it is in the ball park. Get a coule more estimates and see how they compare. good luck.
2007-08-06 14:14:48
·
answer #4
·
answered by Fordman 7
·
0⤊
0⤋
Hooking up a new unit to an old coil is not a good idea. For one it voids the warranty and for another the coil needs to be sized to the outdoor unit. Any contaminants in the coil will compromise the new unit
2007-08-09 12:28:55
·
answer #5
·
answered by Eddie W 3
·
0⤊
0⤋
No, it's not wrong. I work in the seventh circle of hell. The a/c is set at 74 degrees and when it's 98 degrees outside with 89% humidity, it's hotter than hell in the office. I sweat like a hog on a daily basis. God forbid I wear something that's not 100% cotton because I'll be miserable all day. I'd rather freeze my ya-ya's off and have my nips poking right out of my shirt any day of the week. Are you guys hiring?!
2016-05-20 01:42:16
·
answer #6
·
answered by ? 3
·
0⤊
0⤋
We paid $7500 for a heat and air unit for 1900 sq feet, so I think it sounds right.
2007-08-06 14:12:45
·
answer #7
·
answered by mel s 6
·
0⤊
0⤋
I just paid 2800 for my ac to be replaced. (I own a 1368 sqft home) I found ac wholesaler and saved close to 1500.
2007-08-06 14:11:12
·
answer #8
·
answered by drgnotary 3
·
1⤊
0⤋