I just bought a linksys wireless G router. Plugged in everything right, but I can't connect! what's going on??

Question

I did what they asked and checked it twice.
I turned off my comp and powered everything on in this order:
dsl modem, router, PC, and it still doesnt work. I put the setup wizard CD in and at the end of the setup it said...Unable to connect to router, make sure the adapter is plugged in and the adapter works properly.

All the right lights come on and everything, but its not working!!
PLEASE HELP!!!

Answer 1

We had the same problem. Finally we went to their website and down loaded the EasyLink Advisor. It does it all for you. Good luck.

Answer 2

my guess is you have an internet security software.. or software firewall program running on your computer.

the link below brings you to linksys. on the right you can download the PDF of the users guide. follow there simple directions. there are tons of reasons why you cant see the router.

Here is my simple checks
1) turn off any Antivirus and or firewall
2) make sure you didnt set up a static IP on you computer before.
click run
type ipconfig
you should see an ipaddress like 192.168.1.1 if not something is wrong on your computer side..
3) open internet explorer goto webpage http:\\192.168.1.1 if you can then your all set and should goto web unless your isp (verizon or comcast. etc) needs you to configure something else. if thats the case call them
4) there is a reset button on the router. stick a paperclick in the hole or a tip of a pin hold it in for 30 sec. let it reboot and try all the above again.
5)make sure your cables are correct. unplugging a cable to computer should show an alert on windows xp .. a network cable is unpluged. and plugging it in should make it go away.

6) if all else fails maybe try a diffrent one.. you could have a bad router... unlikely but can happen.... repost and let us know

Answer 3

The error message you are getting is not refering to the router, but the wireless adapter on or in your computer. Make sure you have the wireless adapter installed properly and windows says it is working, or in the case of a built in adapter make sure you have turned it on.

Answer 4

attempt this... a million) unplug the flexibility for the two the Linksys router and the Westell DSL modem from ability for 5 minutes. additionally disconnect the DSL modem from the telephone line in this time-physique. 2) plug the flexibility for the modem lower back in, wait until the internet indicator gentle is lit up and green. 3) verify the ethernet cable for the linksys is hooked as much as the modem and the internet port on the linksys. ability the linksys lower back up 4) connect an ethernet cable between your computing gadget and a numbered port on the linksys. verify the instantaneous is disabled (button on computing gadget, or pull the adapter out of your own computing gadget). 5) open up internet explorer (or firefox). if an internet site opens, the router has a good connection to the internet, and if not, do not difficulty approximately it perfect now, we are going to p.c.. lower back up at step 9. 6) style 192.168.a million.a million in the handle bar and you gets a username and password communique field (no consumer call, password is admin). 7) click on the instantaneous tab. substitute the instantaneous community call (additionally popular as a SSID) to something unique and shop the alterations. write the community call down. 8) while the instantaneous internet site plenty lower back up, click on the place it says "instantaneous secure practices" today under the instantaneous tab. set the secure practices mode to WPA and style in a password (8 or extra characters, any combination of letters and numbers). verify you write this down. click shop on the backside of the internet site. you basically secured your instantaneous. 9) in case you probably did not get a internet internet site to open at step 5 (alongside with msn, google, or yahoo), you will could desire to verify with Verizon which you're employing PPPoE and in case you're able to be able to desire to punch the login techniques into your router or not; if so, get the login techniques from Verizon tech help and punch it into the main internet site of the router. if not, ask the tech help rep what the IP handle of your router is on the internet (he will have the flexibility to drag this up); if that's 192.168.a million.something, you're able to be able to could desire to alter the linksys's ip handle and the selection of the domicile community addresses to make it artwork. )I actual have mine set to ten.0.0.a million with an ip handle pool between 10.0.0.5 and 10.0.0.254.) additionally, bear in mind that linksys's tech help quantity is a million-800-326-7114.

Answer 5

I had the same problem when i bought a linksys wireles g router. Turns out they are crap and just don't work with some computers. Return it buy a different router

Answer 6

Do you have a wireless adapter?