2007-08-05 17:30:40 · 11 answers · asked by Anonymous in Home & Garden ➔ Do It Yourself (DIY)
With all due respect; and without ANY details; why not just connect with the agencies governing codes and zoning,,,local to you?
2007-08-05 17:36:04 · answer #1 · answered by DIY Doc 7 · 0⤊ 1⤋
All subdivisions (even those without a homeowners assoc) have some sort of building standard that dictate where sheds can be placed on a property, even if it's just a small metal building purchased from Sears or Home Depot. The biggest issue is the placement of the shed on your lot ~ in almost most all communities, it can not be placed in the right of way area (which is owned by the city), nor can be placed in an easement, nor in the set back area. The set back is a prescribed distance that separates your home from that of your neighbors. In addition to placement on the lot, size can also be an issue and your building strikes me as being pretty large. It will raise some red flags to the neighbors who will most certainly call the city and complain about it, especially if it's blocking someone's view or was built in the set back. One of your neighbors may even think you're building an accessory dwelling unit which will get a building inspector at your place lickety split. So, what can happen? The city can make you tear it out. I'd really recommend you call the city and get the OK and a permit before you proceed any further. It's much easier to pour new cement, then have to disassemble the building and start all over again.
2016-03-16 07:35:13 · answer #2 · answered by Anonymous · 0⤊ 0⤋
1
2016-05-02 19:19:50 · answer #3 · answered by ? 3 · 0⤊ 0⤋
El Dorado County Building Permits
2016-12-17 09:24:04 · answer #4 · answered by Anonymous · 0⤊ 0⤋
El Dorado County Building Department
2016-10-06 12:04:54 · answer #5 · answered by ? 4 · 0⤊ 0⤋
You need to contact your local building department or planning commission. In San Diego I have a shed 9 x 35 and it does not require a permit because it is considered a temporary structure.
2007-08-06 07:11:17 · answer #6 · answered by big_mustache 6 · 0⤊ 0⤋
"If the accessory structure, with the exception of the guest house, is single story, detached, less than 120 square feet of floor space, has no electrical or plumbing installed, and used as a tool or storage shed, playhouse, and similar uses, is exempt from a required permit. California Building Code §106.2 "
That is a direct copy/paste from the link above.
2007-08-05 18:27:03 · answer #7 · answered by albertaguy7 3 · 2⤊ 0⤋
OMG eldo county building dept. is the worse building dept in the world!!!! stay away from them ! they will cost more money then you have or can ever make! you don't have to have a permit for a 10 by 10 or 100sf shed in any other county i think eldo is the same don't let them on your property it will cost you lots of money if you ask them? don't give them your address Tom a contractor that wont work in that county ever !
2007-08-06 01:15:14 · answer #8 · answered by tom k 2 · 1⤊ 0⤋
Contact the County business office and talk with them.
They have permits and etc that ou need to fill out.
Local Contractor ma be of help too.
2007-08-05 18:09:33 · answer #9 · answered by reddcobalt07 3 · 0⤊ 0⤋
Also keep the shed "portable" - meaning don't bolt it to a foundation. If it's a "permanent structure" then it requires a permit. Ours is built on top of railroad ties.
2007-08-06 03:57:53 · answer #10 · answered by Flusterated 7 · 0⤊ 0⤋
Any shed "Structure" requires a permit.
2007-08-05 17:41:32 · answer #11 · answered by Jeff 2 · 0⤊ 0⤋