2007-08-04 15:03:39 · 10 answers · asked by susan c 1 in Cars & Transportation ➔ Maintenance & Repairs
im going to say this because nobody else did... if its none of the above... check you're FUEL PUMP. my car wouldnt start and i checked all of the other things and then i found out it was the fuel pump. hope it helped!
2007-08-04 15:15:48 · answer #1 · answered by ...i'm soo in love... 2 · 0⤊ 0⤋
well how was the battery checked did you put a load tester on it ? you may have lites but can't draw a load due to a brake in the battery. If you hear a hissing sound coming from the battery. It is bad. otherwise you may have a bad starter solenoid
2007-08-04 15:10:17 · answer #2 · answered by Robert LaFrieda 442 3 · 0⤊ 0⤋
If automatic Put foot on brake turn key to start move selector from park to neutral to drive if starts neutral safety switch out of adj.If stick shift the neutral safety switch is in the clutch peddle check an see if it's disconnected.Check the main fuse???
2007-08-04 15:14:41 · answer #3 · answered by 45 auto 7 · 1⤊ 0⤋
YOU SHOULD GET THE VEHICLES COMPUTER SCANNED AND CHECK FOR ANY PROBLEMS AS WELL AS CODES AND THEN YOU WILL HAVE A GOOD IDEA ON WHAT THE PROBLEM TRULY IS.
TRY FINDING AN INDEPENDENT SHOP INSTEAD OF THE DEALER OR A CHAIN STORE BECAUSE YOU WILL BE OVERALL MORE PLEASED WITH THE FINDINGS AND THE SERVICE.
LEAVE IT THERE WITH THEM SO THAT THEY CAN FIND THE PROBLEM FOR YOU, IT WILL BE A LOT BETTER THAN JUST REPLACING PART AFTER PART AND NOT DOING ANY GOOD.
2007-08-08 11:13:47 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Did you check your battery cables to see if they are corroded? I took a wire brush to mine when I thought I needed a new battery and that was all it needed.
2007-08-04 15:38:02 · answer #5 · answered by Gma Joan 4 · 0⤊ 0⤋
Corroded battery cables, or starter in self.
2007-08-04 15:07:37 · answer #6 · answered by alaisjones 4 · 0⤊ 0⤋
It is probably your Starter. My Cousin's Jeep had the same problem a couple weeks ago.
2007-08-04 15:11:25 · answer #7 · answered by Anonymous · 0⤊ 0⤋
check the igniting fuse and make sure all wires are connected and if that doesn't work check your gas level sometimes the gages break and they might be wrong
2007-08-04 15:08:09 · answer #8 · answered by Anonymous · 0⤊ 0⤋
u might want to check the starter
2007-08-04 15:06:56 · answer #9 · answered by toochins 2 · 0⤊ 0⤋
most likely it's the starter....but you might also want to get the altenator looked at, too.
2007-08-04 15:13:37 · answer #10 · answered by kevin77794 3 · 0⤊ 0⤋