English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

6 answers

What Engine? Are you overhauling or Building for performance? are you installing new pistons and rings?
has the block been overheated?
Lots to consider there.

2007-08-03 21:04:27 · answer #1 · answered by Anonymous · 0 1

There are a number of reasons to rebore.

If the cylinder is out of round, scratches or grooves in the cylinder walls, or just wanting to increase the engine size for more performance.

2007-08-04 08:25:20 · answer #2 · answered by Fordman 7 · 0 0

It will be using oil, underpowered & smoking. By then the whole engine will need overhauling anyway. Modern engines are normally good for 200k+ miles before they are really worn out.

2007-08-04 04:15:53 · answer #3 · answered by cuddlyclaud 4 · 0 0

you bore an engine because the cylinder walls have scratches in them. the overbore cuts out the inperfections and makes the walls smooth again so the piston rings don't pass oil and or gas.

2007-08-04 04:03:45 · answer #4 · answered by dgey1 5 · 1 0

never has to, re-boring is when the shave the inside of the cylinders to increase engine capacity ie: 2.0 litre to a 2.3 or something its pretty expensive cause you have to change everything like the pistons and the seals and what not

2007-08-04 04:04:40 · answer #5 · answered by Anonymous · 1 1

When it dies or is past its life in miles.

2007-08-04 04:02:13 · answer #6 · answered by Anonymous · 0 1

fedest.com, questions and answers