how do you configure wireless connection?

Question

I have a router (trendnet) and have connected it to my modem and the internet is running correctly. Now what? The disk that was included doesn't give me any further info. I guess I need to configure my laptop?

Answer 1

If your laptop has a wireless card all you need to do is click the bottom right icon for your wireless adapter, search for networks, then click connect on of the networks available.

Answer 2

If you have not configured the router, configure it as according to user manual. After that you need to configure the labtop's wireless adapter that match the router setting in order to connect to wireless network correctly.

Here are some quick helps:

Wireless Router Configuration:
http://www.home-network-help.com/wireless-router.html

Wireless Adapter Configuration:
http://www.home-network-help.com/wireless-adapter.html

Hope helps.

Answer 3

If Your lap Top has the Wireless enabling facility(Wireless Card)... Follow as below..

Go to Start menu -> Control Pannel -> Select Network Connections -> You will have the icons for possible connections, Right click on Wireless Network Connection -> view available wireless networks -> select your authorized wireless Network and enable it....

Answer 4

go to trendnet website for support they will walk you through the setup

You have the router have you got the wireless card for the laptop

Answer 5

hi,
first you must connect your wireless router to your computer via a cable. accompanying Instruction manual would give you the default ip address (http://192.168.0.1) to the router home page where you can configure the router and set the wireless security.
you would also find some information.
Check the following web sites - http://www.pixmania.co.uk/uk/uk/229618/art/trendnet/tew-432brp-wifi-router-54.html

http://www.trendnet.com/kb/kbp_viewquestion.asp?ToDo=view&questId=409&catId=309

Answer 6

You can use a wireless network to share Internet access, files, printers, and more. Or you can use it to surf the Web while you're sitting on your couch or in your yard. Plus, it's easier to install than you think.

There are 4 steps to creating a wireless network:

1.


Choose your wireless equipment

2.


Connect your wireless router

3.


Configure your wireless router

4.


Connect your computers

For Windows XP users, Windows XP Service Pack 2 is not required for wireless networking, but it does make things much easier. Service Pack 2 also helps protect you against hackers, worms, and other Internet intruders.

1.


Choose your wireless equipment

The first step is to make sure that you have the equipment you need. As you're looking for products in stores or on the Internet, you might notice that you can choose equipment that supports three different wireless networking technologies: 802.11a, 802.11b, and 802.11g. We recommend 802.11g, because it offers excellent performance and is compatible with almost everything.

Shopping list
•

Broadband Internet connection
•

Wireless router
•

A computer with built-in wireless networking support or a wireless network adapter

A wireless router

The router converts the signals coming across your Internet connection into a wireless broadcast, sort of like a cordless phone base station. Be sure to get a wireless router, and not a wireless access point.

A wireless network adapter

Network adapters wirelessly connect your computer to your wireless router. If you have a newer computer you may already have wireless capabilities built in. If this is the case, then you will not need a wireless network adapter. If you need to purchase an adapter for a desktop computer, buy a USB wireless network adapter. If you have a laptop, buy a PC card-based network adapter. Make sure that you have one adapter for every computer on your network.

Note: To make setup easy, choose a network adapter made by the same vendor that made your wireless router. For example, if you find a good price on a Linksys router, choose a Linksys network adapter to go with it. To make shopping even easier, buy a bundle, such as those available from D-Link, Netgear, Linksys, Microsoft, and Buffalo. If you have a desktop computer, make sure that you have an available USB port to plug the wireless network adapter into. If you don't have any open USB ports, buy a hub to add additional ports.

2.


Connect your wireless router

Since you'll be temporarily disconnected from the Internet, print these instructions before you go any further.

First, locate your cable modem or DSL modem and unplug it to turn it off.

Next, connect your wireless router to your modem. Your modem should stay connected directly to the Internet. Later, after you've hooked everything up, your computer will wirelessly connect to your router, and the router will send communications through your modem to the Internet.
How to go wireless

Next, connect your router to your modem:

Note: The instructions below apply to a Linksys wireless router. The ports on your router may be labeled differently, and the images may look different on your router. Check the documentation that came with your equipment for additional assistance.
•

If you currently have your computer connected directly to your modem: Unplug the network cable from the back of your computer, and plug it into the port labeled Internet, WAN, or WLAN on the back of your router.
•

If you do not currently have a computer connected to the Internet: Plug one end of a network cable (included with your router) into your modem, and plug the other end of the network cable into the Internet, WAN, or WLAN port on your wireless router.
•

If you currently have your computer connected to a router: Unplug the network cable connected to the Internet, WAN, or WLAN port from your current router, and plug this end of the cable into the Internet, WAN, or WLAN port on your wireless router. Then, unplug any other network cables, and plug them into the available ports on your wireless router. You no longer need your original router, because your new wireless router replaces it.
wireless modem lights

Next, plug in and turn on your cable or DSL modem. Wait a few minutes to give it time to connect to the Internet, and then plug in and turn on your wireless router. After a minute, the Internet, WAN, or WLAN light on your wireless router should light up, indicating that it has successfully connected to your modem.




3.


Configure your wireless router
wireless cables

Using the network cable that came with your wireless router, you should temporarily connect your computer to one of the open network ports on your wireless router (any port that isn't labeled Internet, WAN, or WLAN). If you need to, turn your computer on. It should automatically connect to your router.

Next, open Internet Explorer and type in the address to configure your router.

You might be prompted for a password. The address and password you use will vary depending on what type of router you have, so refer to the instructions included with your router.

As a quick reference, this table shows the default addresses, usernames, and passwords for some common router manufacturers.

4.


Connect your computers

If your computer does not have wireless network support built in, plug your network adapter into your USB port, and place the antenna on top of your computer (in the case of a desktop computer), or insert the network adapter into an empty PC card slot (in the case of a laptop). Windows XP will automatically detect the new adapter, and may prompt you to insert the CD that came with your adapter. The on-screen instructions will guide you through the configuration process.

Note: The steps below only apply if you're using Windows XP Service Pack 2. If you're running Windows XP and you don't have Service Pack 2 yet, plug your computer into your wireless router and download and install Windows XP Service Pack 2.

Windows XP should show an icon with a notification that says it has found a wireless network.
Windows screen shot

Follow these steps to connect your computer to your wireless network:

1.


Right-click the wireless network icon in the lower-right corner of your screen, and then click View Available Wireless Networks. If you run into any problems, consult the documentation that came with your network adapter. Don't be afraid to call their tech support.

2.


The Wireless Network Connection window should appear and you should see your wireless network listed with the network name you chose. If you don't see your network, click Refresh network list in the upper-left corner. Click your network, and then click Connect in the lower-right corner.
Choose wireless connection

3.


Windows XP prompts you to enter a key. Type the encryption key that you wrote down earlier in both the Network key and Confirm network key boxes, and then click Connect.

4.


Windows XP will show its progress as it connects to your network. After you're connected, you can now close the Wireless Network Connection window. You're done.


Hope it helps!!! xoxoxox