the bottom wheels of the garage door came off due to being too loose now the wire pulley's are both off of either side. How can I fix this?
2007-08-01 13:25:34 · 5 answers · asked by Buddah Mollique 1 in Home & Garden ➔ Maintenance & Repairs
unhook the springs, reattach the cables to the bottom of the door, get the door up and reattach the springs.
2007-08-01 14:33:06 · answer #1 · answered by Anonymous · 0⤊ 0⤋
It's worse than just the head. The loose bolt means the timing gear will have been loose on the crankshaft for a while and the key way in the crank will be worn. The badge is to glue in a new key with epoxy but it's a fix and sell hodge (I know to my bitter cost!) So if you're using a mechanic it will cost a lot to diagnose the extent of the damage if you have the head off. Why not ask if the crank needs repair or replacement. That's a killer! I'd call round some scrapers and see if you can find a used engine but only if the rest of the car is really good.
2016-05-20 04:06:12 · answer #2 · answered by ? 3 · 0⤊ 0⤋
Just rehook them back up and shorten the cable to keep them tight in the future. If you have a problem with this ask a neighbor for help or call a garage door repairman. Good luck.
2007-08-01 13:37:11 · answer #3 · answered by Fordman 7 · 0⤊ 0⤋
These doors have high tension springs that are dangerous. Unless you know what you are doing, you should call a repair man that fixes garage doors.
2007-08-02 08:55:06 · answer #4 · answered by Anonymous · 0⤊ 0⤋
if you have never done this type of repair call a garage door repairman. it can be dangerous because the spring is under a lot of tension
2007-08-01 15:15:57 · answer #5 · answered by Robert P 3 · 0⤊ 0⤋