I have a 2001 3.4L chevy impala and I want to get a K&N cold air intake for it. And they only sell it for 3.8L. I was wondering if the 3.8L has the same intake set up as a 3.4L?
2007-08-01 06:59:26 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Chevrolet
Will not work. The engines have a slightly different air intake setup. I have heard that the kit from SLP will work, just keep the stock air hose. (see link below) There are other DIY options, check out the ideas that are linked below. This should give you plenty of idea on what you can do with your car. FWIW, you can build your own intake from ABS and a K&N filter for uner $100.
2007-08-01 10:58:06 · answer #1 · answered by ganzhimself 4 · 0⤊ 0⤋
I really doubt it the engine block is different the 3/4 is a 60 degree V6 the 3.8 is a V8 with 2 cylinders removed and is a 90 degree V6 . If K&N says it dosen't fit I would beleve them.
2007-08-01 14:29:54 · answer #2 · answered by Mark G 4 · 0⤊ 0⤋
no. they won't work the 3.4 is a spin off of the 3.1. you should be able to track down a good used 3.4 manifold through a salvage yard. good luck
2007-08-01 15:39:55 · answer #3 · answered by doug h 5 · 0⤊ 0⤋
Definitely not, the motors are not even close in design measurements.
2007-08-01 14:03:49 · answer #4 · answered by Deano 7 · 0⤊ 0⤋
same engine setup just bigger displacement. buy it , try it ,and if it dont work take it back
2007-08-01 14:21:24 · answer #5 · answered by Anonymous · 0⤊ 0⤋