2007-08-01 03:56:26 · 6 answers · asked by Phil H 1 in Cars & Transportation ➔ Maintenance & Repairs
The vacuum ball is under the driver's side front fender. Ive seen many of them missing caused by people pulling up too close to curbs,sidewalks,etc. check for cracks and follow the vacuum line also. Ive seen battery acid eat up the hose too
2007-08-04 16:16:32 · answer #1 · answered by Bubb@ 2 · 0⤊ 0⤋
Hi, you have a common problem that's found in many older cars. It's more more likely you have a vacuum leak either in the diaphram, ( a diaphrams is like a air driven piston that moves when air or vacuum is used) or the rubber hose hooked to it. Another area can be the controls where you select where the air can go. When you move the control, you will hear hissing, but it should go away within a few seconds. if it doesn't, then your problem is there.
2007-08-01 04:19:58 · answer #2 · answered by tony h 1 · 0⤊ 0⤋
I believe this operates by vaccuum lines and that a line has come off or broken. Finding it will be a problem and it will probably be difficult to reach. Did you do any work under the dash recently that might have disturbed the lines ? Installed a stereo? That would be a good place to start looking.
2007-08-01 04:07:18 · answer #3 · answered by jimanddottaylor 7 · 0⤊ 0⤋
This is a vaccum leak that goes to the vaccum canister that is under the hood of your car that feeds the vent contol assembly.
2007-08-01 04:06:23 · answer #4 · answered by Anonymous · 0⤊ 0⤋
chevy runs on vacum. 1. check vacum source from engine .
2 .check vacum source from selector switch. 3 . check bellows for door operation. 4 . selector switch leaking.
2007-08-01 04:04:40 · answer #5 · answered by miiiikeee 5 · 1⤊ 0⤋
CHECK ALL THE VACUUM LINES UNDER THE HOOD AS WELL AS IN THE DASH, IT IS VERY COMMON FOR A VACUUM HOSE TO JUST CRACK AND OR GET LOOSE.
2007-08-05 01:46:07 · answer #6 · answered by Anonymous · 0⤊ 0⤋