When we start a load of laundry the washer fills right up very quick. One it spins out the first time and fills up again the water barely runs into the washer, almost like it is not turned on all the way. Is there a fix to this??
2007-07-31 00:02:45 · 3 answers · asked by wyeliab2002 1 in Home & Garden ➔ Maintenance & Repairs
Check the settings on your washer for Water Temperature. If it's set to "Warm/Cold" or with a different rinse water temp than the wash water this could be the cause. When you use the "Warm/Warm" setting, you should be getting warm water wash, warm water rinse. If you're using a "cold" or "hot" only setting for your rinse, the water is only coming from one hose. On warm, it comes from both hoses. Also, check the filter screens for your water intake.
2007-07-31 01:16:33 · answer #1 · answered by ~RedBird~ 7 · 1⤊ 0⤋
there is a solinoid (cant spell) that opens and closes during various wash and rinse cycles..if this doesnt open all the way to let water flow that it is either getting stuck after washer runs for a while..or it could be the timer on you washer..also do you have city water or is your water pumped into your house??? this could mean you might be loosing water pressure after your initial fill up..good luck...P.S...turn your dial past the spin cycle and go to rinse and see how fast your water comes..
2007-07-31 07:16:57 · answer #2 · answered by eb_guy 3 · 1⤊ 0⤋
I think that it probably is supposed to work this way for energy conservation. You didnt offer much information, so go to http://appliancequickfix.com/ and see if you can spot information on your washer.
2007-07-31 08:14:08 · answer #3 · answered by Anonymous · 0⤊ 0⤋