9 ways
2007-07-30 23:09:21
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
There are ten ways in which a batsman may be dismissed. These are explained below:
1) Caught — When a fielder catches the ball before it bounces and after the batsman has struck it with the bat or it has come into contact with the batsman's glove while it is in contact with the bat handle. The bowler and catcher are both credited with the dismissal.
2) Bowled — When a delivered ball hits the stumps at the batsman's end, and dislodges one or both of the bails. This happens regardless of whether the batsman has edged the ball onto the stumps or not. The bowler is credited with the dismissal.
3) Leg before wicket (lbw) — When a delivered ball misses the bat and strikes the batsman's leg, pad or body, and the umpire judges that the ball would otherwise have struck the stumps. The laws of cricket stipulate certain exceptions. For instance, a delivery pitching outside the line of leg stump should not result in an lbw dismissal, while a delivery hitting the batsman outside the line of the off stump should result in an lbw dismissal only if the batsman makes no attempt to play the ball with the bat. The bowler is credited with the dismissal.
4) Run out — When a fielder, bowler or wicket-keeper removes one or both of the bails with the ball by hitting the stumps whilst a batsman is still running between the two ends. The ball can either hit the stumps directly or the fielder's hand with the ball inside it can be used to dislodge the bails. Such a dismissal is not officially credited to any player, although the identities of the fielder or fielders involved are often noted in brackets on the scorecard.
5) Stumped — When the batsman leaves his crease in playing a delivery, voluntarily or involuntarily, but the ball goes to the wicket-keeper who uses it to remove one or both of the bails through hitting the bail(s) or the wicket before the batsman has remade his ground. The bowler and wicket-keeper are both credited. This generally requires the keeper to be standing within arm's length of the wicket, which is done mainly to spin bowling.
6) Hit wicket — When the batsman accidentally knocks the stumps with either the body or the bat, causing one or both of the bails to be dislodged, either in playing a shot or in taking off for the first run. The bowler is credited with the dismissal.
7) Handled the ball — When the batsman deliberately handles the ball without the permission of the fielding team. No player is credited with the dismissal.
8) Hit the ball twice — When the batsman deliberately strikes the ball a second time, except for the sole purpose of guarding his wicket. No player is credited with the dismissal.
9) Obstructing the field — When a batsman deliberately hinders a fielder attempting to field the ball. No player is credited with the dismissal.
10) Timed out — When a new batsman takes more than three minutes to take his position in the field to replace a dismissed batsman (If the delay is protracted, the umpires may cause the match to be forfeited). This rule prevents the batting team using time limits of the game to unfair advantage. No player is credited with the dismissal.
2007-07-31 11:54:27
·
answer #2
·
answered by vakayil k 7
·
0⤊
0⤋
Here they are, straight from the official Laws of Cricket.
Note, there are 10 ways to get out, but a batsman can also retire out, so this can be called an unofficial 11th way.
Law 30: Bowled. A batsman is out if his wicket is put down by a ball delivered by the bowler. It is irrelevant whether the ball has touched the bat, glove, or any part of the batsman before going on to put down the wicket, though it may not touch another player or an umpire before doing so.
Law 31: Timed out. An incoming batsman must be ready to face a ball (or be at the crease with his partner ready to face a ball) within 3 minutes of the outgoing batsman being dismissed, otherwise the incoming batsman will be out.
Law 32: Caught. If a ball hits the bat or the hand holding the bat and is then caught by the opposition within the field of play before the ball bounces, then the batsman is out.
Law 33: Handled the ball. If a batsman wilfully handles the ball with a hand that is not touching the bat without the consent of the opposition, he is out.
Law 34: Hit the ball twice. If a batsman hits the ball twice other than for the purposes of protecting his wicket or with the consent of the opposition, he is out.
Law 35: Hit wicket. If, after the bowler has entered his delivery stride and while the ball is in play, a batsman puts his wicket down by his bat or his person. The striker is also out hit wicket if he puts his wicket down by his bat or his person in setting off for a first run. "Person" includes the clothes and equipment of the batsman.
Law 36: Leg before wicket. If the ball hits the batsman without first hitting the bat, but would have hit the wicket if the batsman was not there, and the ball does not pitch on the leg side of the wicket the batsman will be out. However, if the ball strikes the batsman outside the line of the off-stump, and the batsman was attempting to play a stroke, he is not out.
Law 37: Obstructing the field. If a batsman wilfully obstructs the opposition by word or action, he is out.
Law 38: Run out. A batsman is out if at any time while the ball is in play no part of his bat or person is grounded behind the popping crease and his wicket is fairly put down by the opposing side.
Law 39: Stumped. A batsman is out when the wicket-keeper (see Law 40) puts down the wicket, while the batsman is out of his crease and not attempting a run.
Laws 30 to 39 discuss the various ways a batsman may be dismissed. In addition to these 10 methods, a batsman may retire out. That provision is in Law 2.
2007-07-31 07:53:35
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
Batsman Can be given out in the following Circumstance
Bowled/Caught/Lbw/Run Out/Stumped/Hit Wicket/Timed Out/Handling the Bowl/obstructing The Field
That's It
2007-07-31 07:47:38
·
answer #4
·
answered by samran 2
·
0⤊
0⤋
There are 10 ways a batsman can be given out.
2007-07-31 12:59:31
·
answer #5
·
answered by lsdavidson64 2
·
0⤊
0⤋
hi
he can get out by the following ways.
1.Bowled.
2.Caught.
3.caught behind.
3.bowled.
4.runout.
5.hitwicket
6.obstructing the fielder.
7.timed out.
8.leg before wicket.
9.handling the ball.
In this runout,handle the ball,obstructing the fielder is valid during noball and wides.
bye
2007-07-31 09:17:06
·
answer #6
·
answered by r s 3
·
0⤊
0⤋
Ways to get out
1.Bowled.
2.Timed out.
3.Caught.
4.Handled the ball.
5.Hit the ball twice.
6.Hit wicket.
7.Leg before wicket.
8.Obstructing the field.
9.Stumped.
10.Run out.
2007-07-31 10:36:12
·
answer #7
·
answered by Sarang 3
·
0⤊
0⤋
there are several ways of getting out this is my list;
bowled
caught
leg before wicket
run out
stumped
hit wicket
obstructing the fielder
handling the ball
timed out
2007-08-01 01:54:47
·
answer #8
·
answered by Nick G 1
·
0⤊
0⤋
bowled
caught
leg before wicket
run out
stumped
hit wicket
obstructing the fielder
handling the ball
timed out
2007-07-31 05:55:32
·
answer #9
·
answered by dan brown 3
·
0⤊
0⤋
1. lbw
2. cathch out
3. bowld
4.run out
5. obstructing the field
6. hit wicket
7. handling the ball
8. double hit
9. timed out
10.hit the ball twice
11. stumped
2007-08-01 01:43:33
·
answer #10
·
answered by Anonymous
·
0⤊
0⤋