In my desk top computer a problem is developed. when ever i put a DVD ,CD in to it to run .Nothing is displayed. What may be the problem. is there any quick solution to it without going to mechanic
2007-07-29 03:32:19 · 9 answers · asked by inddrajit mitra and t.b.mitra 1 in Computers & Internet ➔ Hardware ➔ Desktops
Go To Your Computer And Try Searching For The name Of the Disc. I Had The Same Problem Before, But I Fixed It By Doing That.
2007-07-29 03:34:59 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Open my computer and check whether there is icon for CD, if it is there than
1. go to device manager(Right click on My Computer > Properties > Hardware > Device Manager)
2. Right click on CD and go to properties check device should not be disabled,
3. if it is enabled then problem is with your lens and you will have to clean the lens, you will have to take it to mechanic,
4. if icon is not there open your CPU and tight all the connections of the CD,
5. then start PC go to CMOS Setup make sure CD Rom is detected, and then follow steps given above.
2007-08-01 07:11:31 · answer #2 · answered by pulkit 1 · 0⤊ 0⤋
Try this.http://www.moonvalley.com/products/rwavdc/enable.htm
It looks like autrun is disabled for your drive. You can go to MY Computer and click on the dvd/cd drive to access it as well. Good luck.
2007-07-29 10:36:48 · answer #3 · answered by Anonymous · 0⤊ 0⤋
well if you want to open the CD or DVD just go to "MY computer" and open it...
Hope this helps ... If you put a litle more detail in your question people would be able to give a more detailed answer
2007-07-29 10:36:48 · answer #4 · answered by I'm Sri Lankan 3 · 0⤊ 0⤋
happens on mine sometimes - i just select 'My Computer' then select the DVD/CD Drive and it displays the CD/DVD that is in and then select that and it runs
2007-07-29 10:36:12 · answer #5 · answered by Anonymous · 0⤊ 0⤋
change the cd drive and install a new combo drive
2007-07-29 10:51:33 · answer #6 · answered by bhups 5 · 0⤊ 0⤋
may be your cd drive withered
2007-07-29 10:39:30 · answer #7 · answered by Anonymous · 0⤊ 0⤋
The machine is not on.
2007-07-29 10:35:39 · answer #8 · answered by adam h 3 · 1⤊ 0⤋
no
2007-07-29 11:04:18 · answer #9 · answered by Rana 7 · 0⤊ 0⤋