we just recently built a shower, the lip of the shower is too low and the water spills out alot, what can i do

Question

the whole bathroom ends up wet, which is a real hazard, is there anything to fix this or maybe some bathroom accesory that might help?

Answer 1

I know exactly what you mean. You can check into a peice of bathtub molding (for lack of a better word). It's just a peice of plastic that usually goes around the edge of a shower/tub combo to prevent leaks through the curtain. You could also consider installing a glass door with a sweep instead of a shower curtain. That is what we have done and it has worked quite well. Good luck!

Answer 2

not sure what the lip is that you are talking about. Maybe you should re-word your question to get a better answer.

You can always get a hand held wand shower fixture that works well and there is no water released from anywhere other than the shower head which can be attached to the shower head installed on the wall.

if you want more help ... help us understand what you are talking about.

Answer 3

I'm not sure what you mean by lip, if the doors are not properly caulked, then it will leak, make sure the base is level, and the door are on good. Most shower pans are 3-4 inches deep so you have me stumped on what you mean by lip

Answer 4

Could this be caused because your drain is not functioning properly? might be clogged with hair? If so plunge the drain and pull out the hair so the water drains properly and quickly.