English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

i put a newTFI Module new starter new battery new battery terminals new coil and it still will not run why it trys to start when cranking it over but will not run please can somebody help also checked the timing its fine its in time and the plug wires r fine and the button in the distrubutor is new i dont no what else it could be its getting gas and everything its not flooding or nothing so please help thanks

2007-07-27 14:51:19 · 4 answers · asked by Anonymous in Cars & Transportation Maintenance & Repairs

4 answers

Try this:

Buy a $2.00 can of starting fluid and spray it down the throttle body, stop spraying and keep cranking and see if it will start and run. If it does then you are either not getting fuel due to a bad fuel pump or the throttle position sensor is bad.

Good Luck!

2007-07-27 15:17:03 · answer #1 · answered by CactiJoe 7 · 0 0

re check the order you have the plug wires in. It sounds like you got them out of order when you put them back on...I have done that a million times. Even if you think you got them right ... go re check them... with everything you have done it has to run... you say it sounds like its trying and thats exactly what one will sound like when you get the plug wires out of order.

2007-07-27 23:25:51 · answer #2 · answered by Gobyknows 5 · 0 0

it is getting fuel? new tfi module? wires are good? plugs are good? coil is good? starter is good? timing is set correctly? and it still dont run... you must have left something out.

2007-07-27 22:06:26 · answer #3 · answered by Anonymous · 0 0

try to push start it.

2007-07-27 22:02:13 · answer #4 · answered by tweed801 5 · 0 0

fedest.com, questions and answers