I am using a Fluval Filter, added the cycle stuff, AmQuel to remove ammonia,Cloride,Etc... Plus I did use the Water conditioner called NovAqua. Now it is 24 hours later and the tank is cloudy looking. What did I do Or didnt do wrong? What should I do Now ???? HELP !!!!!!!!
2007-07-26 14:15:46 · 10 answers · asked by imjae_02 1 in Pets ➔ Fish
Sounds like you are ok... What you are seeing is new tank haze. It's completely normal and as the name would imply, most tanks get it. It's a bacterial bloom that will settle out as the bacteria starts to grow on the surfaces in the tank instead of in the water. Just keep a watch on your ammonia levels over the next few weeks, change water as needed to keep it down and you'll be fine.
For more about what is happening in your tank and why it's important to watch the ammonia levels right now, see this link:
http://www.firsttankguide.net/cycle.php
MM
2007-07-26 14:46:44 · answer #1 · answered by magicman116 7 · 1⤊ 0⤋
That's normal. It's a beneficial bacteria bloom that will settle down in a few days. The bacteria will help process ammonia from fish waste. This is why you shouldn't ever thoroughly clean a fish tank-- you need that bacteria. You might notice a bloom later on if you clean your tank a little too much. It's normal. I personally don't like adding stuff to my tank, I prefer to settle changes in pH etc by doing regular water changes, but for a new tank it would be ok to add some StressZyme... it's a culture of those bacteria to help establish a new tank. Good luck :)
2007-07-26 21:36:41 · answer #2 · answered by Anonymous · 1⤊ 0⤋
I dont think you did anything wrong. you just have to wait for the water pump to suck all the gunk down to the rocks then all the clean water will go back up and out. It will take a few days. I use to have a 10 gallon tank for 4,5 years we used to change the water every 6 months. Then clean all the rocks with a strainer. and wash all the gunk off the fake plants. Then it would still look cloudy for a few days. BUT you have a bigger tank!!! It may take longer. You do have a pump & rocks as a filter system ? right? it will be a while. Hang in there.
2007-07-26 21:26:50 · answer #3 · answered by mr_know_it_all_12345 3 · 0⤊ 1⤋
This is normaly during cycling. Often in a new tank you'll get bacteria bloom which clouds the water. This should settle as the tank cycles.
Make sure your filter is running and start cycling the tank and you should be fine.
Here is a quick article I wrote on cycling a tank.
A Short Brief on the Nitrogen Cycle.
When you start a new aquarium it will go through what is called the nitrogen cycle.
The nitrogen cycle is a process which allows "good" bacteria to establish and multiple in the tank, thus breaking down the fish wastes.
Fish excrete ammonia as a waste product. Ammonia is highly toxic to fish and even small quantities in the water can kill your fish. The first bacteria that establish as part of the nitrogen cycle break down ammonia into a product called nitrites.
Nitrites are also toxic to your fish, but not nearly as toxic as ammonia is. As the nitrites start to rise in the tank the bacteria that feed on nitrites will start to multiply and consume the nitrites breaking them down into nitrates.
Nitrates are also toxic to fish, but only in very high quantities. The nitrates will continue to rise in your tank as long as you have fish and are feeding them. Water changes are used to reduce the nitrate levels.
How long does this process take?
Typically the nitrogen cycle takes between 4-6 weeks to complete. During this time it's recommended that you take samples of your tank water to the local fish store and ask them to test it for ammonia, nitrites and nitrates. The test levels will progress as follows:
Stage 1:
Ammonia zero
Nitrites zero
Nitrates zero
Stage 2:
Ammonia starts to rise
Nitrites zero
Nitrates zero
Stage 3:
Ammonia continues to rise
Nitrites begin to rise
Nitrites zero
Stage 4:
Ammonia levels drop
Nitrites continue to rise
Nitrates begin to rise
Stage 5:
Ammonia: zero
Nitrites levels drop
Nitrates continue to rise
Stage 6:
Ammonia: Zero
Nitrites: Zero
Nitrates continue slow rise
Tips to reduce the time of the nitrogen cycle.
The easiest way to reduce or eliminate the nitrogen cycle is to use a filter from an established tank. This filter already has the bacteria needed to breakdown ammonia and nitrites. By using an established filter you essentially bypass the nitrogen cycle.
Another easy way to shorten the cycle is to use "seed" gravel from an established tank. Simply take a few cups of gravel from an established tank and add it directly into the new tank. This gravel will contain a starter of the bacteria needed. If you don't want to add the gravel to the tank because it is a different color/stone than your gravel you can simply put it into a nylon stocking or cheese cloth "bag" and drop it into the tank. Using this method can cut your cycle time by 50%.
Finally there are live cultures of bacteria such as Bio-Spira which will seed your tank with the bacteria needed. This product can virtually eliminate the cycling process.
Stocking your tank during this period.
During the cycling process you want to stock your tank very lightly. This is because if you have too many fish the ammonia will build up faster than the bacteria can break it down and your fish will die. I recommend only 1 or 2 hardy fish such as mollies. You want a fish that can tolerate the fluctuating ammonia and nitrite levels during the cycling process. There are many fish which should be avoided during this process including all catfish and any scaleless fish such as loaches.
Feeding during the cycling process.
I recommend that you feed your fish only once per day, and only as much as they will eat in 5-10 seconds. You should net out any food left over after feeding to prevent it from breaking down into ammonia. Once the cycling process completes you can double the feedings to twice a day.
Water changes during the cycling process.
If done correctly your tank shouldn't need any water changes during the cycling process. However should you find that your ammonia or nitrite levels are dangerously high during the cycling process you should do an immediate 25-50% water change to lower those levels. Water changes during the cycling process can extend the time it takes for your tank to cycle. Once the tank has completed cycling you should start your weekly 10-25% water changes to lower the nitrates in the tank.
2007-07-27 00:20:56 · answer #4 · answered by Anonymous · 1⤊ 0⤋
That is normal. It is beginning to cycle. If you already have fish in there, I would use Prime to help protect them and do regular water changes. The bacteria has to build up in the tank.
2007-07-26 21:45:37 · answer #5 · answered by boncarles 5 · 0⤊ 0⤋
Are you leaving your lights on all the time? If you are, don't do it. Your lights should not stay on all the time. Do not leave the lights on more than 8 hours a day. It builds up algae and it will cause the water be cloudy all the time also, and that puts stress on your fish.
How many fish do you have in it and what kind are they?
2007-07-26 21:23:42 · answer #6 · answered by mscountrygirl74 1 · 1⤊ 0⤋
Keep watching your pH. Sometimes a tank will get a foggy look before it clears all the way up. It is the bacteria working. It should clear up in a day or two.
Good Luck!!
2007-07-26 21:21:54 · answer #7 · answered by savvy_rae 2 · 1⤊ 0⤋
This is normal just keep the filters and aeration going, it will clear itself out as things settle down.
2007-07-27 00:54:54 · answer #8 · answered by aquamac 4 · 0⤊ 1⤋
its normal ur getting a bacteria bloom its what u want hers a site to help u along http://www.firsttankguide.net/cycle.php
2007-07-26 21:21:49 · answer #9 · answered by goldfish 2 · 2⤊ 0⤋
do a water change
2007-07-27 00:12:38 · answer #10 · answered by fish_for_brains 1 · 0⤊ 0⤋