It has been running well all summer but now when I have it in neutral it runs well (even revs up) but when I put it in gear it cuts out and wont run. What is something I can do to figure out the problem. My boat is a 1992 Glastron with a v6 mercruiser. In board outboard
2007-07-22 18:11:56 · 6 answers · asked by Ben M 1 in Cars & Transportation ➔ Boats & Boating
There is an intermittant shift switch located on the bracket to which your lower shift cable is attached which may be hanging up and cutting off engine . Either the upper cable from the shifter control is out of adjustment or the lower cable has to much resistance and needs replacing
2007-07-22 23:56:38 · answer #1 · answered by paultech6 4 · 0⤊ 0⤋
Mercruiser has a engine cut out switch when going in an out of gear it's on the shift cable next to the carb see if it's working. Or out of adj.
2007-07-23 08:57:16 · answer #2 · answered by 45 auto 7 · 0⤊ 0⤋
bad fuel filters usually cause cutting out under a load not when put in gear. However they are cheap and easy. My first guess is the idle is to low. But it's just a guess without more info easy to try though.
2007-07-23 05:52:17 · answer #3 · answered by subgenius 4 · 0⤊ 0⤋
yes change the fuel filter and get the rest of a good tune up also.
2007-07-23 01:23:51 · answer #4 · answered by coasty_14 2 · 0⤊ 0⤋
sounds like the fuel filter needs changed
2007-07-23 01:14:28 · answer #5 · answered by BOB H 4 · 0⤊ 0⤋
dont put it in gear, row
2007-07-23 17:18:21 · answer #6 · answered by the1much 2 · 0⤊ 1⤋