I set a password on my wireless network, but forgot it. What do I do now?

Question

I have a cable modem and a 802.11g router. I know the IP address for the router.

Answer 1

Just log back into the router and reset the wireless password.

If you dont remember the ROUTERS password you will have to reset the router to factory defaults and set it all up again. Most routers have a small "reset" button to accomplish this task. You usually just push that button in for 10-20 seconds which resets the router to "new" configuration.

Answer 2

First, try resetting the router. This can be done by locating the reset button and inserting a slender object into the hole and holding it for a few seconds. If this doesn't work, unplug all of your network related cables, wait for about 3 minutes, and connect and setup your router again. Hope this helps.

Answer 3

Examine the router and read the documentation which came with it. There should be a switch on it which will reset it to its factory defaults. Then you can access it with its IP address and default password

Answer 4

relies upon on the instantaneous router...yet possibly no longer. you may, although, reset the router to production unit defaults and reprogram. there is frequently a reset button on the back someplace. it extremely is frequently no longer something better than a small hollow - very like the single on the front bezel of your DVD - that has a button. Use a paper clip to press the button additionally, look back at your emails of registrations in that component physique - you have used the comparable password for different issues...it occurs. sturdy success.

Answer 5

Hi,
This is easy just look on the back of your router and you will see a small pin hole, just push a pin into it for longer then 5 Sec's and "Bingo" your router will be reset back to factory settings (No WEP etc). Hope this helps you.