I had my window screen wipers replaced because my old ones stopped working...think motor went. When I use them now they squeek and jump...I went back to the garage and they messed with them and said they should be fine but the problem is still there. They work but obviously something must be wrong for them to squeek and jump. I cleaned the windowscreen so my window is clean. Help! lol
2007-07-22 04:43:01 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
Your window may be clean, but not the blades themselves. Take a cloth and put some rubbing alcohol on it, Then pinch the rubber part of the blade in the cloth where the alcohol is, and rub it up and down the blade to clean any dirt or grime off of the blade and see if it improves.
2007-07-22 04:48:45 · answer #1 · answered by yugie29 6 · 0⤊ 0⤋
the arms are likely bent a bit try changing the angle of the blade to glass it should sweep back under with the change of direction, also try bending them away from the glass to ease the pressure to glass.
2007-07-22 04:54:06 · answer #2 · answered by Vince J 5 · 0⤊ 0⤋
how bout just replace the wiper blades, there cheap and can make a big difference when its pouring rain
2007-07-22 04:51:18 · answer #3 · answered by Christian 7 · 0⤊ 0⤋
it is possible that there is an underlying binding problem in the linkage that caused the motor to fail.. the new motor is fighting the same binding problem now
2007-07-22 04:55:28 · answer #4 · answered by John St.Louis 5 · 0⤊ 0⤋
wax on windsheild from self service car wash clen windsheild with borex use to habve this problem happen all the time
2007-07-22 04:49:59 · answer #5 · answered by Anonymous · 0⤊ 0⤋