2007-07-21 13:41:36 · 8 answers · asked by Linda H 1 in Computers & Internet ➔ Hardware ➔ Printers
turn off printer and then turn it on again, this should fix it.
2007-07-21 13:45:58 · answer #1 · answered by aussie sheila 6 · 0⤊ 0⤋
If you removed any "doors" or access panels from the printer to remove the jam, make sure that they are put back properly and securely. Then turn off the printer off and reboot your computer. If this doesn't fix it, try the same procedure, but turn the printer off and unplug it for at least 20 seconds before rebooting and turning the printer back on. If that doesn't work, contact the manufacturer.
2007-07-21 13:54:43 · answer #2 · answered by kati9 2 · 0⤊ 0⤋
This happened to me and all I did was unplugged my printer for about 30 seconds and plugged it back in and it was fine, but be sure to make sure there's no little pieces of paper still stuck in it first.
2007-07-21 13:55:26 · answer #3 · answered by inluvwithb 3 · 0⤊ 0⤋
Turn it off and on again, and if that doesn't work, hit the "refresh" button -- I'm not sure exactly what it's called on your printer, but it's the one that is most likely flashing a red or orange color. Good luck!
2007-07-21 16:20:03 · answer #4 · answered by Happy 3 · 0⤊ 0⤋
Same as above but you still might have a little piece of paper still stuck in there.
2007-07-21 13:50:27 · answer #5 · answered by vicki p 3 · 0⤊ 0⤋
if you have kids pick it up and shake it upside down see if any toys fall out
2007-07-21 13:51:34 · answer #6 · answered by Anonymous · 0⤊ 0⤋
its posable that ur ink is low, and thats why it wont print
2007-07-21 13:51:50 · answer #7 · answered by jonathan927111 1 · 0⤊ 0⤋
sent for service.
2007-07-21 22:32:36 · answer #8 · answered by nancyfoo 1 · 0⤊ 0⤋