2007-07-21 12:41:11 · 6 answers · asked by james s 3 in Cars & Transportation ➔ Maintenance & Repairs
No you have a front wheel drive motor which is configured very differently than a rear drive motor. In fact almost opposite.
2007-07-21 13:02:15 · answer #1 · answered by Pengy 7 · 0⤊ 0⤋
Like pegny said the oil passages ETC are different. Just get a rear wheeled drive motor, They are common.
2007-07-21 22:34:25 · answer #2 · answered by lostin90s 3 · 0⤊ 0⤋
Go to an engine rebuilder and ask if the bell housing is the same bolt pattern.ALSO FIND OUT IF THE ENGINE MOUNTS WILL FIT. If all the hardware will work, I don't see a reason why it wont work. Of course you'll need to change the oil pan if it isn't the same.
2007-07-21 19:53:26 · answer #3 · answered by Wisdom 6 · 0⤊ 0⤋
What car did your Camero come with ? It would be possible, but it may be very expensive. I know the V-6 3800 is used on some chevy cars from the factory.
2007-07-21 19:49:35 · answer #4 · answered by david d 5 · 0⤊ 0⤋
it may be the same engine block that is for the camaro but i am not sure. you would probably have to call a dealer to ask them if its the same motor. i would suggest putting a 350 in it though. it is very easy and cheap, depending on what year camaro it is.
2007-07-25 15:11:40 · answer #5 · answered by pimpjon 3 · 0⤊ 0⤋
Yes you could but lots of change over to do.
Computer, wiring, exhaust, motor mounts, the list goes on.
2007-07-21 19:53:48 · answer #6 · answered by epitt72 3 · 0⤊ 0⤋