2007-07-20 07:34:52 · 10 answers · asked by oap 2 in Home & Garden ➔ Garden & Landscape
two things cause this. One is you could have it out too far. But, most likely you are holding the rotating head too close to the object intended for cutting and not letting the end of the line do the cutting.
2007-07-20 07:38:55 · answer #1 · answered by Greg L 5 · 0⤊ 1⤋
Strimmer Cable
2016-12-15 05:02:44 · answer #2 · answered by dodsonjr 4 · 0⤊ 0⤋
Strimmers are for light trimming work like edges, round trees and shrubs. Not for cutting the lawn.
Your grass it to compacted or course for your lightweight strimmer.Try using a petrol driven one and see the difference.
2007-07-20 10:04:55 · answer #3 · answered by Terry G 6 · 0⤊ 1⤋
You're probably trying to cut too thick material with it most DIY strimmers aren't much good for anything thicker than grass
2007-07-20 07:44:17 · answer #4 · answered by green0 2 · 0⤊ 1⤋
Wound incorrectly?
Too much line out?
Too close to rocks/impediments.
Too much RPM?
Note the circle that is created when spinning in grass. You only need the outer edge in contact with the limit of your trim.
2007-07-20 07:40:00 · answer #5 · answered by reynwater 7 · 0⤊ 0⤋
probably its because the strimmer line is not thick enough,if your line is 2ml, try a 3ml,it works for me.
2007-07-20 07:44:42 · answer #6 · answered by speck786@btinternet.com 2 · 1⤊ 0⤋
in simple terms remember to are employing the main suitable gauge of string counseled to your trimmer and make optimistic that that's wound interior the main suitable path. It sounds like yours has been wound backwards.
2017-01-21 11:08:50 · answer #7 · answered by huhn 3 · 0⤊ 0⤋
old trimmer line or burr on out port
2007-07-20 08:00:17 · answer #8 · answered by Mike H many moons 2 · 0⤊ 0⤋
try square cord instead of round, try 2.4 ours used all day never brakes only wears,
2007-07-20 13:16:54 · answer #9 · answered by Anonymous · 0⤊ 0⤋
possibly the gauge of the string isn't heavy enough?
2007-07-20 07:41:05 · answer #10 · answered by weez 2 · 1⤊ 0⤋