English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Hi Guys,
I hope you guys can give a step by step guide on how to fix this problem. My signal light on the right flashes at a faster rate than on the other side. it is not a major problem but it is annoying me.
thanks,
aaron

2007-07-18 03:33:19 · 18 answers · asked by Aaron C 2 in Cars & Transportation Maintenance & Repairs

18 answers

Check all your lights are working. I would think a bulb has gone in one of your indicators

Get a friend to watch as you indicate left right brake and hazard flash, you can do it in park

Good luck

2007-07-18 03:35:41 · answer #1 · answered by lee (northeast UK) 2 · 2 0

This is usually an indicator that one of your light bulbs on the side that is flashing faster is burned out.

Turn on your signal and check to be sure both the front and rear signal lights are flashing. Replace the appropriate one and it should go back to flashing at the normal rate.

2007-07-18 03:36:07 · answer #2 · answered by hsueh010 7 · 1 0

Try changing the bulbs. It's usually caused by a difference in the charge taken by the bulb. If one is about to go and the element is thinning, then it will draw more power and effect the circuit which controls the timing.

What happens when you put you 'Hazard Warning' lights on (all four at once)

2007-07-18 03:37:09 · answer #3 · answered by mark 7 · 0 1

The faster flash means that your light bulb is out. Check your bulbs. If none of them flash check your relay.

2007-07-18 03:35:46 · answer #4 · answered by Icarus 2 · 2 0

Hi

Perhaps one of the indicator bulbs has blown on the right side?

Cheers

Geordie

2007-07-18 09:28:52 · answer #5 · answered by Grizz 5 · 0 0

That's probably an indicator of a burnt out signal light. I know it is on some Mercedes.

2007-07-18 03:36:31 · answer #6 · answered by BillyTheKid 5 · 1 0

normally that is a sure sign a bulb has blown on the side going faster or you have a wiring fault in the circuit that side.

2007-07-18 03:44:12 · answer #7 · answered by one shot 7 · 1 0

That happened to me when the lightbulb for that signal burned out. I just had to change the signal light and all was well.

2007-07-18 03:36:36 · answer #8 · answered by Anonymous · 1 0

I had the same problem years ago on a Cadillac and it turned out that the Turn Signal Switch was bad and had to be replaced.

2007-07-18 03:51:55 · answer #9 · answered by 101 2 · 0 1

Yeah just change both sides the bulb may be bad and check and see if the connection is clean and getting a good connection. hope this helps.

2007-07-18 03:37:06 · answer #10 · answered by JT B ford man 6 · 1 1

fedest.com, questions and answers