It is a manual crank window. Mine got busted out so i am not sure how to replace it. i bought the window but dont know how to install it exactly. the car is a 84 toyota camry sedan if that helps you any. any help will help thankx in advance!
2007-07-17 12:48:41 · 4 answers · asked by kyle w 1 in Cars & Transportation ➔ Maintenance & Repairs
take door panel off and water paper and then you will be able to see where the glass bolts onto the regulator, usually 2 bolts hold the glass on and if not bolts sometimes it's a slidetrack with 2 clips, you will have to take the outside belt moulding off and the inner belt moulding at the top of the door and you can then angle the new window into the tracks and slide it down into the door and bolt it to the regulator, replace all parts taken off and your done.
2007-07-17 12:58:17 · answer #1 · answered by mister ss 7 · 0⤊ 0⤋
take door panel off -- lower window channel and remove and clean out broken glass ---- get the cork that you will need to re-install (it's a strip that holds the window in the track at the bottom of the glass) you will probably need to remove the wing window if there is one to gain space to slide in the new` glass -- look for all the screws and weather stripping --- if you are still baffeled the seek a pro window person....
2007-07-17 13:00:57 · answer #2 · answered by XTX 7 · 0⤊ 0⤋
Take the glass and place it up against the outside of the door, then run all around the outer edges with duct tape to hold it up. Hope this helps!!!
2007-07-17 13:21:29 · answer #3 · answered by Anonymous · 0⤊ 1⤋
You have to take the door panel off from inside. You should be able to see the screws. It's pretty self-explanitory after that.Have fun.
2007-07-17 12:58:02 · answer #4 · answered by Mickie K 4 · 0⤊ 0⤋