how to set up a remote desktop connection between two seerate networks?

Question

i want to set u a remote desktop connection between two seperate networks but I can't figure out how to do it, help please.

Answer 1

If you want to set up a Remote Desktop Connection, firs you must make the systems to communicate with each other.
If both the system can communicate with each other, you can easily configure Remote Desktop Connections from Right Clicking My Computer and Taking the properties.

If you can give some mroe details about your network, then I will gieve some more suggestion.

Cheers!

Shaba

Answer 2

Let's call the locations A and B.

Set up the LAN IP addresses at Location A using the 192.168.1.0/24 subnet. This means that all LAN devices at location A have LAN IP 192.168.1.x, subnet mask 255.255.255.0. I would make the router IP 192.168.1.1 which is also the default gateway and the DNS for this LAN. I would give each pc I want to remotely access a static LAN IP and I would then reduce the DHCP pool substantially. Let's say you have 25 pcs at A. I would reserve, for static IP use, the 192.168.1.2 - 192.168.1.155 for static IP and leave the 192.168.1.156 - 192.168.1.255 for the DHCP range. This is probably a lot more than needed but it is better to have more than not enough.

Similarly for Location B, I would assign the LAN IP in the 192.168.2.0/24 subnet. I would use the same DHCP and static assignment and assignment reservations here.

Please note you cannot have location A and location B on the same subnet or chaos will reign. (We do not want chaos in office ever

Now you did not indicate how you wish to link locations A and B.

If you have a point - point T1 dedicated line, you need an access not a gateway router and I would assign the WAN IP at location A at 10.10.10.1 and at B at 10.10.10.1 Set up a static routing table (there is no wisdom to use an automated routing protocol like RIP, BGP, etc as it is so simple). You did not identify which side is to have Internet access so you need to provide Internet at one location and fold this into the routing protocol.

If you have a Point - to Internet, you must purchase a router that enables vpn to reside on the router. For CATV (cable internet) and DSL, consider either the Adtran Netvanta 2050 enhanced (for small network) or the Adtran Netvanta 2100. For Point to Internet T1, consider the Adtran Netvanta 3200 with a T1/FT1 NIM interface.

Set up a Virtual Private Network between A and B.

Enable remote desktop on all pcs you wish to access.

With VPN enabled between the 2 locations, you can proceed to use Remote Desktop to access pcs. You can also swap files back and forth, back up location A to location B, etc.

Answer 3

open port 3389 on the router and foward to the ip of the computer being accessed at both ends and set up the user allowed to access the remote desktop

Answer 4

distant laptop, secure with domicile windows XP professional, lets you connect on your laptop around the internet from very almost any laptop, Pocket laptop, or telephone. as quickly as linked, distant laptop components mouse and keyboard administration over your laptop whilst exhibiting you each and every thing it somewhat is occurring on the reveal screen. With distant laptop, you may pass away your laptop on the workplace without dropping get entry to on your records, purposes, and digital mail. Your sales rigidity would have the skill to get entry to the main contemporary pricing sheet from on the line with the help of using distant laptop in domicile windows XP professional. A digital deepest community, or VPN, is a private communications community frequently used interior a company, or with the help of quite a few distinctive companies or companies, to talk over a public community.

Answer 5

1- you'll need programs
2- computer experince

helpful websites

1-http://secure.logmein.com/dmcq/095/home.asp
2- http://www.anyplace-control.com/