or near a auto.
2007-07-17 05:21:16 · 9 answers · asked by ? 7 in Cars & Transportation ➔ Maintenance & Repairs
On most cars, the horn button acts as a ground, meaning, there is power to the horn at all times. The horn is activated by grounding the other wire, which is done through the horn button. Sometimes a wire that goes to the horn button gets worn and shorts out causing the horn to blow. Sometimes the horn button itself is faulty and causes intermittent honking. Check to make sure your horn button is not loose and is properly secured to the steering wheel.
2007-07-17 05:29:11 · answer #1 · answered by the mazda mechanic 4 · 2⤊ 0⤋
A wire with the insullation knicked in the steering column.
2007-07-17 05:25:26 · answer #2 · answered by Fordman 7 · 1⤊ 0⤋
the problem is in the steering column right underneath the steering wheel. It is a wear item that only a dealer will have to replace it.
2007-07-17 05:33:38 · answer #3 · answered by equipartsdude 2 · 1⤊ 0⤋
There is an old ex-jazz musician embedded in the grill of the car.
He is trying to get people to notice him as you turn the corner ... however most people just look at the car ... but not the grill work.
2007-07-17 06:08:09 · answer #4 · answered by Ronatnyu 7 · 0⤊ 2⤋
wiring in steering wheel. my friends 66 mustang used to do the same thing
--good luck
2007-07-17 06:09:44 · answer #5 · answered by mr.z28 3 · 1⤊ 0⤋
short circuit in the steering column
2007-07-17 06:08:20 · answer #6 · answered by rich2481 7 · 1⤊ 0⤋
Women in short skirts usually will make mine go crazy. :)
2007-07-17 07:35:12 · answer #7 · answered by auditor4u2007 5 · 0⤊ 0⤋
loose wire
2007-07-17 05:28:38 · answer #8 · answered by Anonymous · 1⤊ 0⤋
hmm i do not know ...good question
2007-07-17 10:21:07 · answer #9 · answered by Anonymous · 0⤊ 0⤋