I need to remove some adhesive tape from the door of my Blazer. The tape did hold some molding in place. What is the best and cheapest way to remove? I need to sand and primer this door.
2007-07-17 04:42:42 · 6 answers · asked by upright n breathin 7 in Cars & Transportation ➔ Maintenance & Repairs
Well since your going to be repainting it anyways.
Scrape it off with a razor blade and clean up the rest with the thinner that you already have on hand.
let it sit on for a minute and wipe it off.
2007-07-17 04:57:23 · answer #1 · answered by cgriffin1972 6 · 1⤊ 0⤋
since you are going to be sanding the door anyway, go ahead and sand the adhesive off.
2007-07-17 04:48:58 · answer #2 · answered by richard b 6 · 0⤊ 0⤋
Goo-Gone - it's magic on adhesive residue. Put just a little on a cloth and rub.
2007-07-17 04:50:39 · answer #3 · answered by jajdinde 2 · 1⤊ 0⤋
Pull off what you can, and use some type of solvent to remove the residue. Gasoline, thinner, naptha, acetone, alcohol, or even WD-40.
good luck.
2007-07-17 05:20:30 · answer #4 · answered by Fordman 7 · 0⤊ 0⤋
the best is adhesive remover. Nail polish remover will work.
2007-07-17 04:57:00 · answer #5 · answered by dougwomack 2 · 0⤊ 2⤋
alcohol, brake cleaner, carb cleaner. if your sanding and priming it don't matter much what you use.
2007-07-17 04:52:49 · answer #6 · answered by Anonymous · 1⤊ 0⤋