English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

1 answers

I think this is the procedure you are asking about. I copied it from my 2007 owners manual--.

Your audio system shows a welcome message on the display when you turn the ignition switch to the ACCESSORY (I) or the ON (II) position. You can see a message ‘‘WELCOME’’ on the display when your vehicle was new.

You can also customize this welcome message to your liking with the audio controls.

You can set up to about 16 characters on the display. To select a character:

Make sure the audio system is off.

Push and hold the TUNE knob, then push the power/volume knob on the audio control panel. You will see the first letter blinking.

Turn the TUNE knob to change a letter.

Push the top of the SEEK button to select the next segment, then turn the TUNE knob to select a letter. Repeat this procedure to set your message.

To change the letter, select the previous segment by pushing the bottom of the SEEK button.

The system will return to the audio display about 5 seconds after you stop selecting a letter.

hope that's what you were asking about

2007-07-17 04:36:24 · answer #1 · answered by honda guy 7 · 0 0

fedest.com, questions and answers