English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

wtf?

2007-07-16 21:01:29 · 5 answers · asked by Anonymous in Cars & Transportation Boats & Boating

5 answers

Oil in the out drive that is 1 of the problems omc had as the boats on a plane the out drive is out of the water getting hot from the exhaust , when you stop the cold water is sucked into the out drive. Try changing an flush real good than try using it . if turn white again than get pressure check for seal leaks.

2007-07-17 06:50:13 · answer #1 · answered by 45 auto 7 · 0 0

Filler plug seals are a good place to start.
Don't leave this oil/water mix too long.
Rust pits on bearings & gears can not be removed.

2007-07-17 22:48:20 · answer #2 · answered by gejandsons 5 · 0 0

Sounds like water is mixing with the oil, you need to get it to the mechanic pronto..

2007-07-17 04:06:27 · answer #3 · answered by Mavs rule 6 · 0 0

I would guess a bad seal and water is getting in.

2007-07-17 05:39:21 · answer #4 · answered by cowboydoc 7 · 0 0

yup water in the oil..bad seals or cracks

2007-07-17 04:08:58 · answer #5 · answered by MC 7 · 0 0

fedest.com, questions and answers