I would like to cut woven woods shades. Lowe's said I could just use a saw. Has anyone ever tried this?

Question

I have 30 windows to cover, trying to save money.

Answer 1

Yes, I have done this. One thing must be done before cutting - tape the are to be cut! We used 2" blue painters tape and used an electric miter saw to cut through the middle of the tape. Not using tape with cause damage to the ends and can cause splintering down the individual blades.

Good luck!

Answer 2

This Site Might Help You.

RE:
I would like to cut woven woods shades. Lowe's said I could just use a saw. Has anyone ever tried this?
I have 30 windows to cover, trying to save money.

Answer 3

WOVEN? meaning in the horizontal sense,,, End cut issues?

I've not ever done it, but it seems to me, after seeing how BLINDS are cut at HD/Lowes/ even Walmart, that your best effort might succeed using a chop saw with a finish blade or diamond cut blade.

BUT then I re-read, noting you said SHADES, and without any real details describing things such as Roman shades/ Fine bamboo, etc. I suspect your best effort would be in having the shades/blinds in the BUNCHED UP, tight to the mechanism, position.

With all due respect too, how might one accept a job doing 30 windows without some forethought, or equipment? Hopefully,,,and again with no offense; you aren't strictly in the "window treatment" business. Was there ever a consideration to purchase to the correct size? OR have them sized at the point of purchase?

Steven Wolf

Answer 4

If I were making something that I presumably cared that much about the finished product, then I would go to a lumber company & ask them for a number of very good reasons, There are also online companies that sell all sorts of woods, but you have to be careful with them, as there are inherent problems with buying things online, whereas in person you can check things like the moisture content of what you're buying before you've paid for it. That's as politic as I can be on the subject, being a person who works with wood & played guitar a lot more before carpal tunnel made it hard to do more than a half hour stretch of the latter.

Answer 5

I am not famliar with woven woods, and have not tried it. However, this should not be a problem at all. Tightly bundle the shade in the closed position. You might even tape them at the end you are cutting. A miter saw with a carbide blade would work very well to cut them. Be sure to hold them tight against the fence.

Answer 6

If you are planning to start on your woodworking project, this isn't something you should use, it's something that you would be insane not to. Go here https://tr.im/Kdbkf
Truth is, I've been a carpenter for almost 36 years, and I haven't found anything like this for less than 10's of thousands of dollars.

Answer 7

In the event that you need to discover pleasant thoughts for woodworking I can propose you to check here http://woodworking.toptips.org

It's perfect in the event that you are simply starting out or in case you're a prepared carpenter.
It has thousands and thousands of woodworking arrangements and you have a CAD/DWG software to view and alter the arrangements. You have regulated instructions with photographs and excellent blueprints and schematics. On the off chance that you are a beginner this is the simplest approach to start your woodworking projects, and on the off chance that you already have experience you can at any rate discover a ton of interesting thoughts!

Answer 8

Allow the saw to get its maximum rpm before cutting. Cut very slow to avoid tear or ripping effect.

Answer 9

Hermionesoul is right.
I saw on HGtv where they said to tape FIRST.
Go to HTtv.com and see if you can find it on HGtv/diy.com