What do I have to connect to what to make the thing go? O.K. turn on the water feed. Deisel feed . it has been standing for a long time but now it is going in the water and I need power.
It has a full fuel tank.
I have a crank and I know what the decompressor is. I have some fast start and a battery.
How much engine oil.
If someone could give me a few clues I would be very happy
Thankyou
2007-07-15 23:05:31 · 1 answers · asked by Anonymous in Cars & Transportation ➔ Boats & Boating
It a small Eng since it's a crank start won't us starting fluid. Wiring not hard to do.solenoid wire to key switch s terminal, red wire to Ign switch i terminal, blk to ground >alt wire to bat there is a fuse block wires run threw that then to switch. Look on Volvo's web there is probably a wire schematic there.It a manual stop so no wires there. the rest of the wires are oil ,temp, volts, depends if you have a gauge panel or a light panel for the instermants. Hope this helps.Oil if your not changing then add a little oil an check stick repeat if more needed?till full mark.
2007-07-16 02:24:35 · answer #1 · answered by 45 auto 7 · 0⤊ 0⤋