I want to make a pipe from everyday household products. Now, i want something that will last for a long time, unlike an apple. I would really appreciate some good instructions and material lists on how to make one. Thanks. =]
2007-07-15 17:01:56 · 6 answers · asked by Paige 2 in Home & Garden ➔ Do It Yourself (DIY)
Corn Cob pipe
2007-07-19 16:41:56 · answer #1 · answered by krissyderic 7 · 0⤊ 2⤋
Best Homemade Pipe
2016-12-14 08:54:31 · answer #2 · answered by ? 4 · 0⤊ 0⤋
ok, theres many ways u can make one.
if u want to go really easy do this get a ball point pen and empty everything jujst keep the hallow tube. thake that hollow tube to a lighter flame till som what soft about 5 to 8 seconds and bend to 90degree angle. put flame about a half to 3 quarter inches from one end when u do this odnt make it to far in the center or it will b all akward to smoke out of.now go get a wine pourer r anything that is bowl shaped with a small stem and stick the stem into the end that is pointing up . if itt is a little to small or big just heat end once again just till soft.
if u are looking for something better ur going to have to go buy a few things. u can go to any hardware store and in the pkumbing or sprinkler system isle get small stainless or regular steel piping. when u do this u can make it easy by getting a small one third inch or all the way up to quarter inch piping that is about two or three inches long. make sure it is threaded in the end u intend to put bowl on. Then find a 90 degree angler that will fit into the threaded holes.then get something in the shape u would like ur bowl to b that has the end to fit into the other side of the angler.
Try to make sure u dont use brass or copper tubing it can release chemicals u dont smell or see into ur lungs and give u cancer. Its inportant to use heat risistant metals such as steel iron and brass., they work pretty well.
good luck and keep smokin
2007-07-19 11:03:42 · answer #3 · answered by bublerman 1 · 4⤊ 3⤋
not really from home but, if you get a decent sized piece of wood and whittle down with a knife and sand paper then you will get a really cool looking pipe, i just started working on one myself
also a drill will make your life alot easier if have one
2007-07-15 17:11:56 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Something from the 15 years I spent as a prison officer :-)
The three marks at the top of a coconut? Drill one for the mouthpiece, one for a vent pipe/thumb hole and the last one for the cone piece. Araldite/liquid nails the shorts of pipe into the shell. Leave the coconut milk in there to cool the charge. taste great too (apparently...)
2007-07-15 21:06:47 · answer #5 · answered by John S 4 · 4⤊ 2⤋
Wood is the most pleasant. A drill that will make two perpendiculat holes will be what you need and a knife to whittle the mouthpiece. Be creative. A nice piece of interesting wood that has been dried might be your best shot.
2007-07-15 17:06:04 · answer #6 · answered by Texas Cowboy 7 · 2⤊ 2⤋
Parts Needed: (1) 1/2 PVC Elbow 12 Inches of 1/2 Inch PVC SCH-40 Pipe. 1 Piece of screen. Take the PVC Pipe stick it into the Elbow. Jam the screen down into the elbow.
Next load the elbow with ye-ole wacky TA-Back-ee and light it up. That bowl(elbow) will hold to serve a party of 4.
FYI: The fumes from the heated PVC pipe melting will give you what you are looking for in life!
2007-07-15 18:30:49 · answer #7 · answered by Jeff 2 · 1⤊ 26⤋
Uhhhhh...i dont think anyone here can solve your drug problems. Sorry.
But you might want to go to Ebay and buy one.
hahaha.
2007-07-15 17:05:16 · answer #8 · answered by ? 4 · 0⤊ 41⤋