how do i get it out
2007-07-15 08:17:31 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
Call a lock smith -- he has the correct tool to remove broken keys... He has done this many times before.. If your on Yahoo asking what to do . Let the pros handle the job...
2007-07-15 08:28:13 · answer #1 · answered by Gerald 6 · 1⤊ 0⤋
Use a large paper clip, bend it straight and then bend a small v-hook on the end and insert it into the lock---try to catch the teeth of the broken key with the v-hook and pull it out....another tool I've used in the past is a coping saw blade broken in half---the little teeth on it help to catch the teeth of the key....hardware stores carry them.
2007-07-15 09:47:32 · answer #2 · answered by paul h 7 · 0⤊ 0⤋
Needle nose pliars or a strong magnet. If you can get the car started, just go back in time and stop yourself from using the key. I love those cars!! Hope this helps!!!!
2007-07-15 08:24:05 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Call Marty or Doc Brown!
Sorry....I had to say it.
I hope you get that key out!
2007-07-15 08:23:28 · answer #4 · answered by T the D 5 · 0⤊ 0⤋
take the ignition off and let it slide out.
2007-07-15 08:20:29 · answer #5 · answered by Anonymous · 0⤊ 0⤋
You might try a pair of insulated needle-nosed pliers, a tweezer or even a vise-grip. Thanks for the two points. Good luck!
2007-07-15 08:23:18 · answer #6 · answered by Kiffin # 1 6 · 0⤊ 0⤋
sounds like you need a flux capacitor to prevent it from ever happening
2007-07-15 09:23:02 · answer #7 · answered by anthentherwasi 6 · 0⤊ 0⤋