I have an old boat trailer with new set of rollers (came with it)
I was wondering if they sell bunks that will slip over the rollers..as the rollers do not support the weight properly for a 16' plywood boat
2007-07-12 16:49:50 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Boats & Boating
Since you have a plywood boat the bunks are the way to go as rollers put pressure in 1 spot, Leave the rollers for the keel.that make it easy er at low water ramps. You need 4 bunk ends an 2 2x4x8s PT an carpet install an fit so the boat rest on the bunks an the keel just touches.Hope this helps
2007-07-13 03:43:33 · answer #1 · answered by 45 auto 7 · 0⤊ 0⤋
5
2016-05-21 03:17:07 · answer #2 · answered by ? 3 · 0⤊ 0⤋
You can buy bunk brackets and make your own. Why do you want bunks over rollers? I would sugest either new heavier rollers or bunks, but not both. Keel rollers yes. A full set of rollers no.
2007-07-12 23:53:10 · answer #3 · answered by Anonymous · 0⤊ 0⤋
They have brackets you can buy that should clear the rollers. These brackets are for bunks. If there is a trailer or marine store in your area then i would suggest going there they should have everything you need.
2007-07-12 16:58:33 · answer #4 · answered by Anonymous · 0⤊ 0⤋