Had electrical fire and need to lower the unit to get the cover off.
2007-07-12 09:23:11 · 4 answers · asked by Pooch 1 in Cars & Transportation ➔ Boats & Boating
What kind of Eng,Johnson mercury starboard side intermediate housing that bolted to the transom there is a hole look inside there is a screw turn it will by pass oil an lower the Eng. I wouldn't take the hose off to drain the system or you have fits lifting the Eng up to fill the pump.
2007-07-12 09:36:58 · answer #1 · answered by 45 auto 7 · 0⤊ 0⤋
look on the bottom of your trim cylinder there should be a plug you can take out and slowly let your engine down. Put a bucket under the cylinder are you will have a nasty mess. Another way you can do it is to trace the two wires for the trim and touch them to a hot battery, if the motor goes up then switch the wires and it should go down. good luck
2007-07-12 16:25:29 · answer #2 · answered by Anonymous · 0⤊ 0⤋
On the Pump, look on the bottom for a knob to turn, sometimes this work. If, not, it bucket time. Get a bucket and on the rams loosen the hose fittings enough to let it go down. After it all fixed you can re-tighten everything and bleed to air out.
2007-07-12 09:47:49 · answer #3 · answered by Snaglefritz 7 · 0⤊ 0⤋
all makes have a by-pass. it might be port or stbd., but all have an access hole down low on the mounting bracket.
2007-07-12 09:46:39 · answer #4 · answered by Anonymous · 0⤊ 0⤋