freeze them and put the ice into the barrel.
2007-07-11 07:45:38
·
answer #1
·
answered by Myself 2
·
4⤊
0⤋
if you know the volume of each jug and pour the water from one jug in to the barrel and than submerge the jug and note the level when you pour the second jug you will be able to distinguish which jug gives you the water level on the barrel.
2007-07-11 08:42:25
·
answer #2
·
answered by goring 6
·
0⤊
0⤋
Place the jugs on a table. Place the barrel on the floor.Place a straw in each that curves down to the barrel.Suck on each straw so the water from each jug pours into the barrel.Watch it and you can tell the source of the water.
2007-07-11 07:47:00
·
answer #3
·
answered by standandwork 5
·
0⤊
1⤋
freeze the water into two blocks of ice. Place the two blocks of solid ice inside the barrel. One would have to remember which block came from which jug, of course. Perhaps food coloring could be used.
2007-07-11 07:48:23
·
answer #4
·
answered by Roger S 7
·
0⤊
0⤋
Freeze one jug only and pour everything in barrel.
You will be able to distinguish water from one jug and ice floating on top is form other jug.
Simple !!!
2007-07-11 09:03:20
·
answer #5
·
answered by shipdada 3
·
0⤊
0⤋
Leave 1 jug closed.
2007-07-11 07:43:11
·
answer #6
·
answered by U_Mex 4
·
1⤊
0⤋
Add a lot of salt to one jug of water, the other volume of water will float on top.
2007-07-14 06:03:39
·
answer #7
·
answered by johnandeileen2000 7
·
0⤊
0⤋
Saw the barrel in half, pour one jug in each half
2007-07-11 07:46:21
·
answer #8
·
answered by Tom :: Athier than Thou 6
·
1⤊
0⤋
They either can be freezed and get it out or they can be put under the sun so the water can be evporate.
2007-07-11 08:41:54
·
answer #9
·
answered by Anonymous
·
0⤊
0⤋
wow, I thought I had it and I went to anwser and I figured out I was wrong
2007-07-11 08:03:05
·
answer #10
·
answered by ~Mir-Zombie~ 2
·
0⤊
1⤋