I have a 2000 Chevy Monte Carlo and when I switch on my high beams, they turn on but if I let go of the switch, they do not stay on. Can anybody give me some answers to how to fix this problem.
2007-07-09 05:15:15 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
you need a new light switch on it that's a simple one,those get a little worn and do this,replacing the switch will repair it,good luck on it,hope this helps.
2007-07-09 05:20:24 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
this is a silly question but i have to ask it anyway, are you sure your pulling it back far enough? a lot of cars have a flash to pass set up meaning if you pull a little you can flash your high beams and if you pull a little harder they will click to high beam and stay there untill you pull again
2007-07-09 05:27:38 · answer #2 · answered by mygirlsmyworld 1 · 0⤊ 0⤋
try pressing the switch the opposite way, dont pull on it but push it. Some cars are like that
2007-07-09 05:26:47 · answer #3 · answered by Bohdan K 3 · 0⤊ 0⤋
what you did was break the switch that turns on your high
beams. if so that something the shop has to fixed.
2007-07-09 06:00:26 · answer #4 · answered by mad_1240 6 · 0⤊ 0⤋