computer monitor?

Question

Can I install 2 monitors vertically on the same computer so as to see a full page without scrolling and what hardware or software must I have?

Answer 1

Yes.

You need two video cards that will play nicely together, or a dual head video card. Dual head cards are relatively cheap and plentiful, so that is probably the easier option.

Install the card and drivers, then go to the Display Properties (Control panel or right click on the desktop) and the Settings tab.

You should have a picture of two monitors, 1 and 2. Of one is grayed out, then click on it and click on the Extend tick box under the picture, then Apply. This will make your second monitor active.

Now, simply drag and drop the images of the monitors to where you want them. I.e. if your second monitor is directly above the first, then drag the 2 monitor in the window to be directly above the 1 monitor.


The down side of this is that you are going to have a gap in your documents where the images on the two monitors fail to touch. This can be slightly distracting as your brain perceives this as looking though a window at a solid object. So it expects to see things move down the top screen, disappear behind the gap for a second and then appear on the bottom screen. Instead things jump immediately from top to bottom.

Getting a monitor that will rotate, or a VESA mount that will let you rotate an LCD may be a nicer option. A lot of video drivers will let you rotate the image.

Answer 2

Yes.

You need two monitors and either two graphics cards or a graphics card with twin output. You also need a shelf to put one of the monitors on.

You might be better off getting a large widescreen monitor which can be rotated. For example: http://www.hardwarezone.com/news/view.php?cid=6&id=4849 (there's an image of it rotated if you scroll down a bit)

Answer 3

you need to use some thing called the mirror App it rather is rather rather ordinary. not a lot of human beings actually understand this yet displays are literally created from mirrors and laptop boards with rather of wires and string. you ought to get a screw motive force set and peel off the adhesive rubber screw protectors around the reveal, they should demonstrate screws, eliminate the screws and you ought to have the skill ordinary purely eliminate the reveal front cover. this might demonstrate various laptop boards and the reveal unit, there'll be screws around the reveal unit, all you ought to do is take away those screw, lean the reveal unit at an perspective and disconnect any wires related to it. you % a mirror approximately an identical length through fact the reveal unit which you purely bumped off. Now you ought to take your warm glue gun (silicon works just to boot, yet get the costliest one as that ensures severe high quality adhesion and you do not % the wires to return off as quickly as each and every of the screws are back in.), for each cord, place a blob of glue on the back of the mirror, heavily connect each and every cord to the glue, it rather is not appropriate what gets placed the place, if there's a plug related to the top of the cord then purely pull it off. attempt to be very careful, as there at the instant are not any screw holes for the mirror, you purely ought to apply your warm glue or silicon to stick the mirror back in place, as quickly as you have accomplished this, place the front cover back and all it rather is screws. you are able to throw away all left over screws, plugs and the reveal unit you bumped off. Congratulations you have effectively put in the mirror app.