i have unplugged my devices from the motherboard and then plugged it again and now my computer doesnt boot !
I really dont know how to solve the problem please help !
Thanks in advance !
2007-07-08 04:12:16 · 3 answers · asked by ub40iz 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
I have ide cable and on mu motherboard are two ide channel with names IDE 1 and IDE 2 so I dont know what to do please help...
2007-07-08 04:53:03 · update #1
it is very simple, are the devices SATA or IDE? they both need 2 plugs, one for power and the other for DATA. Make srue you have pluged the 1 IDE cable into both the hard drive and the CD, then into the motherboard. now there are some 4 pin molex connectors, they give the Hard drive and CD power, so connect thoes.
if this does not work take a picture and host it on a site like imageshack
then send the link to me
2007-07-08 04:18:14 · answer #1 · answered by Anonymous · 0⤊ 0⤋
1. Connect all power cables.
2. Disconnect the CD Rom drive RIBBON cable at the CD Rom end and re-boot.
3. If PC still won't boot, the CD Rom and hard drive RIBBON cables are reversed. Correct and re-boot.
4. Still stuck? Take your PC to a repair shop.
TIP: Next time, label the cables.
2007-07-08 11:30:53 · answer #2 · answered by ELfaGeek 7 · 0⤊ 0⤋
There could be lots of problems. You might have accidently loosened or unplugged something else. You might have switched the cd rom and hard drive but I do not think that would affect it though.
2007-07-08 11:17:59 · answer #3 · answered by ambush45th 2 · 0⤊ 0⤋