Whats wrong? and what can I use to fix it are do to fix it.Its not leaking anything Can anyone help?
2007-07-07 12:15:00 · 4 answers · asked by Edwin_TAT2007 1 in Cars & Transportation ➔ Maintenance & Repairs
Check your fluid could be low so it takes the pump more time to get it where it needs to be, also consider after all this time taking it to a tranny shop and have the fluid changed, and the screen cleaned.
2007-07-07 12:18:07 · answer #1 · answered by Pengy 7 · 0⤊ 0⤋
I'm not sure this is what you're describing, but several years ago I had a car that got to where I could put it in reverse and it would take ten seconds or so for it to begin moving backward. It worked far better after having the transmission replaced.
If what you're describing is transmission-related, it would almost certainly cost less to have the transmission serviced with routine maintenance than to have a rebuilt or new one put in. Something else that sometimes matters is the torque converter, but I don't know enough about your specific vehicle to be able to comment on it meaningfully.
Hopefully the filter that filters the transmission fluid is what needs to be replaced, and the fluid changed while the mechanic is at it. I've also heard terms like torque and band adjustments, but I know very little about them.
Good luck.
2007-07-07 19:26:22 · answer #2 · answered by night_train_to_memphis 6 · 0⤊ 0⤋
fluid level , torque converter or pump going bye bye or just tranny going. Get it shop asp if it is not fluid level. Longer you wait the more it will cost
2007-07-07 19:39:06 · answer #3 · answered by miiiikeee 5 · 0⤊ 0⤋
I suggest you refer to the manual on the section about computerized settings
2007-07-07 19:22:31 · answer #4 · answered by spicysaucylatina 4 · 0⤊ 0⤋