... not sure if I should use carb cleaner on it or just soap and water... any suggestions?
2007-07-07 04:43:05 · 10 answers · asked by Flex 2 in Cars & Transportation ➔ Motorcycles
Look at #20-23 and #27
http://www.knfilters.com/faq.htm
Do not use pressure washer, high pressure air, or a hose! You will ruin the mesh/filter.
2007-07-07 04:48:02 · answer #1 · answered by Anonymous · 3⤊ 0⤋
DO NOT use Carb cleaner!!!! go buy the K/N recharging kit. you can find it at most parts stores. Also if you decide to use carb cleaner or gas, kiss your investment in that rechargeable air cleaner goodbye. Ive used a K/n on my motorcycle and cars for years . I was stupid early on and didn't head the directions once, I ruined that 75.00 filter. don't be cheap and negate the recharge kit,look you all ready bought that expensive filter ,maintain it properly.
2007-07-07 04:51:30 · answer #2 · answered by Anonymous · 3⤊ 0⤋
Follow Peter Griffin's advice.
K&N made the filter.
They know the correct way to clean their own filters.
Do not use carb cleaner or any toxic fluids like contact/brake cleaner, gasoline, kerosine, etc.
They will destroy the paper element.
At the very least, just use compressed air and blow through the air cleaner with a blow gun.
2007-07-07 06:58:26 · answer #3 · answered by guardrailjim 7 · 1⤊ 2⤋
buy the cleaning kit, its like $10.00 you have to spray the cleaner in it let it sit about 5 min the rinse with water from inside out and let it dry about 2 hours or so then re-oil with the oiling spray.
2007-07-07 04:49:08 · answer #4 · answered by Anonymous · 1⤊ 0⤋
they sell a cleaning kit for 8 bucks buy it your going to need the oil from the kit anyway
1. a k&n is cotton gauze not paper
2.if you blow it out you WILL ruin the filter. This will spead the fibers and that is not good
3. buy the cleaning kit follow the instructions.
2007-07-07 07:00:00 · answer #5 · answered by 51 6 · 0⤊ 0⤋
Compressed air. Then dish soap and water. Wait for it to dry. K&N has a special oil spray. Spray the filter and wipe off the eccess oil.
2007-07-07 05:00:17 · answer #6 · answered by Shawn T 3 · 0⤊ 4⤋
do not use compressed air use the k-n recharge kit follow the direction and it will work just fine
2007-07-07 05:04:51 · answer #7 · answered by honda vtx 3 · 2⤊ 0⤋
You need to purchase the K&N recharge kit.
2007-07-09 02:13:40 · answer #8 · answered by Anonymous · 0⤊ 0⤋
use soap and water and high pressure air plus a good cleaner for anything is brake cleaner its the shi*
2007-07-07 04:48:04 · answer #9 · answered by engtuner0107 1 · 0⤊ 5⤋
RECHARGE KIT!
2007-07-09 12:55:54 · answer #10 · answered by Anonymous · 0⤊ 0⤋