Just wondering whether its worth saving the money to do it myself or if i should just go ahead and take it to the brake place
2007-07-05 16:32:31 · 3 answers · asked by thelostchinese 1 in Cars & Transportation ➔ Maintenance & Repairs
It is not that big of a job. You will want to take your drums to a machine shop or brake shop and have them turned. This will true up the drums and you will get better service from the brakes. Only do one wheel at a time, if you get confused on how a spring goes, you can look at the other wheel and see the correct way it goes back together. good luck.
2007-07-05 16:41:21 · answer #1 · answered by Fordman 7 · 0⤊ 0⤋
If they are disc brakes then the job is not bad. You will want to get the rotors resurfaced or the new pads will squeal. I just did the rear on my camry and I went to Napa and got the rotors from china and they work just fine. So new rotors for the same price of turning the old ones.
2007-07-06 02:17:43 · answer #2 · answered by mr.answerman 6 · 0⤊ 0⤋
its pretty simple job but you gotta do it right. I'd say about 30 minutes to 45 minutes.
2007-07-05 23:41:30 · answer #3 · answered by Anonymous · 0⤊ 0⤋