I have a chevy s-10. Every time I would flip the switch to turn on the tail lights and dash lights, the fuse would blow. i replaced the switch and i still have headlights. Can I get a complete wiring diagram for my tail lights? Or a shop that can look at it near pekin IL?
2007-07-04 04:08:44 · 5 answers · asked by chris p 2 in Cars & Transportation ➔ Maintenance & Repairs
I disconnected the tail lights and it still blew, so I'm thinking it's at the dash or the fuse box.
2007-07-04 04:15:25 · update #1
Autozone's web site has a bunch of electrical schmetics online.
You can find an auto electric repair shop listed in the yellow pages. I think it is better to take it there instead of the dealer, since electrical problem are all they mess with.
2007-07-04 04:16:34 · answer #1 · answered by Fordman 7 · 0⤊ 0⤋
It sounds like you have a grounded tail light wire. Trace the wiring and you will likely find the cause, there is the possibility you will need a new light switch as well. Good Luck and GOD Bless
2007-07-04 11:12:49 · answer #2 · answered by Anonymous · 0⤊ 0⤋
wireing diagram is in the chilton book get one from parts store. but first check all the wires at the rear of the truck to see if they are bare or shorted to ground. do you have a trailer wire connecter on the truck they ofton get damaged due to hanging low
2007-07-04 11:17:54 · answer #3 · answered by tott1 5 · 0⤊ 0⤋
remove wiring from each side one at a time see if fuse still blows
2007-07-04 11:17:55 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Look for a short, did someone install a trailer connecter look there
2007-07-04 11:23:23 · answer #5 · answered by Charles s 4 · 0⤊ 0⤋