does anyone know a way to get the wax out of the squirt holes?
2007-07-03 04:02:21 · 5 answers · asked by Alex 1 in Cars & Transportation ➔ Maintenance & Repairs
Simple enough just disconnect the hose under the hood and use a piece of wire to clean the nozzle from the bottom ( from the top and the wax may be pushed back into the nozzle ) ( match the nozzle dia. if possible )
2007-07-03 04:07:28 · answer #1 · answered by ANON 3 · 0⤊ 0⤋
Wrong - Disconnect the tubing from under the hood, use compressed air to blow it out.
Otherwise you will damage the brass inserts inside the nossle.
If you do use a pic of some sort you can adjust the aim - otherwise it will just mess it up
2007-07-03 11:19:50 · answer #2 · answered by cgriffin1972 6 · 0⤊ 0⤋
Get a very small piece of wire, like from a plastic bag tie on a loaf of bread, peel the paper off it, and stick the wire in the jet to clean it out.
2007-07-03 12:33:30 · answer #3 · answered by Scott H 7 · 0⤊ 0⤋
With a needle. Just be careful not to make the hole bigger in the process.
2007-07-03 11:06:32 · answer #4 · answered by kb 3 · 0⤊ 0⤋
take a toothpick and poke them then try the spayers. be carefull and not break the toothpick off inside it.
2007-07-03 11:08:12 · answer #5 · answered by noteethontop 2 · 1⤊ 0⤋